I have a template file that I got online by someone else.This is similar to the LightBurn’s Test Material option, but a bit more in depth.This is apparently done with multi mode (sub layers), but I cannot figure where the settings are configured (increment of power).All CO2 (red) layer is 2400 speed, okay. But how to set the 10% increment in...
2023-11-2412310When I try to engrave a simple word, the job aborts and I get an error in the console about a line in the GRBL code needing to be an integer:I tried a new USB cable but it still happens.
2023-11-2414210Since two weeks I have a problem. I engrave tekst onto wood and since two weeks the background is also slightly burned. I use the laser and software for over a year now but this never happened before. restarting the program doesnt help. What is going wrong?
2023-11-2316710OK, somehow a color has linked to a setting. When I open LB create a shape and use that color it comes up 'LINKED" would not be an issue but it is not a setting for that color I use. I can manually unlink it and set to the proper settings, but it is a pain. I’m lazy. Can not find where to permanently UNLINK the color. help…
2023-11-2312910Hello everyone, I wanted to engrave a dog tag for my dog, the material is matt stainless steel, which also worked well with the settings 450 speed and 100 power. in addition, I set the power on my Ray5 to 120. Now it’s just that the lower start is not engraved properly but remains rather light. what could be the reason for this? would it help...
2023-11-2312910I’m new to laser cutting and tried cutting and engraving on plywood - the first cut came out perfect but then I tried to cut the same thing twice, but both came out wrong. Is this due to the laser getting stuck whilst moving or what might be the issue? Had a similar issue when engraving a photo, where it was fine, but then halfway up the imag...
2023-11-2215910LB 1.4.04 GRBL on Win10 via USB.Not sure if I’m missing something, but I have been able to set up any project with multiple fill layers, all set to “fill all”, so that it scans all layers in one pass.I can achieve this if I flatten the fill layers into a single layer.For example, I have four fill layers with the only difference b...
2023-11-2211520I doubt this pertains to Lightburn directly but I’ve tried other groups and zero help. I have an OMTech 60 2028 red n black. I find that it if set multiple passes on a cut line it ‘appears’ to be ok. if i set multiple passes on an engraving, the head goes back to origin then proceeds to perform second pass. It’s always off j...
2023-11-2223610I have an Ruida RDC6563FG laser controller controlling a Max laser.If I manually open the Max laser shutter off the Ruida control panel the shutter opens and the laser fires correctly.But when I create a program using RDCUTIST, the program runs through its sequence, but the laser shutter does not open.Any help would be appre...
2023-07-1944470I currently have my laser engraver (atomstack a5) out in my shop, and it requires a USB connection, as I only have one computer I have to leave it out there until it is finished. Is there any laser engravers that I could hook up to my computer (whether by USB or wirelessly) send the commands to it and take my computer away from it.
2023-12-1313610Using a basic rectangle as an example, how can I remove part of one of the lines; i.e., cut an opening in the side. Also can I drag a corner to change either the shape of the rectangle or make one of the walls go at an angle?
2023-12-1213510Just updated Lightburn (not used it for months while moving from one location to another). The version I downloaded is 1.4.04 running on Mac Os Big Sur version 11.7.10. Homing is correct. Z direction is correct. Jogging in X or Y direction is wong. Both directions are opposite to the expected. I engraved a project and the laser worked fine. The ima...
2023-12-1210810I’m using fonts and no matter the type it’s never coming out good, any solutions? Thanks.
2023-12-1211110As a type of refrigeration equipment, the main components of a laser chiller include a compressor, evaporator, condenser, capillary throttle valve, etc., thereby achieving the refrigeration effect of the unit. The factors that cause abnormal discharge temperature of the compressor include the adiabatic index of the refrigerant, compression ratio (c...
2023-12-129810Chanelink Halloween\Christmas Laser Processing Art CarnivalShow your design talent and win a cool laser engraver cutter.TimeUpload of work and canvassing period: October 25, 2023 - December 25, 2023Winner announcement time : December 29, 2023ContentEligible participant:Laser industry practitioners, enthusiasts, who must be at...
2023-10-253723126
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski