How do I turn on laser beam at low power so I can set the laser on the spot where I want it to start cuting?
2023-12-0123010I upgrade my machine to use a more power laser a few months ago. In the past few days the power supply will begin flash and the machine will not function.I figure there is either a short with the 4 to 3 wire adapter or the laser is pulling too much power.Once I unplug the adapter to the laser the machine powers on. I assume if it was a power draw i...
2023-12-0122310In order to swiftly heat the material to the vaporization temperature, evaporate it, and produce holes in it, laser cutting involves the employment of a high-power density laser beam. The material is cut to completion as the beam shifts it through the perforations, which continuously generate thin (like 0.1 mm) slices.The technologies involved in ...
2023-11-3024710The main parameters of industrial cameras include resolution, frame rate, signal-to-noise ratio, pixel depth, etc. In addition, other important parameters also include dynamic range.Dynamic range refers to the brightness range in the scene or the photosensitive range of photosensitive materials such as film, CCD, CMOS, etc. For film and pho...
2023-11-3020410Let me share my personal opinion,Industrial vision definitely requires,1. Hardware stability is beyond doubt. 7 * 24 operation should be used in many scenarios, as well as on-site working environments (temperature, dust, etc.)2. Piracy and genuine software. (Small businesses don't require it, but try to make it genuine. WIN11 Professional Editio...
2023-11-3025330According to the different cooling media, condensers can be divided into three categories: water-cooled condensers, air-cooled condensers, and evaporative condensers. Water cooled condensers use water as the cooling medium, and the condensation heat is carried away by the heating of water. Water cooled condensers can be divided into shell and tube ...
2023-11-3019410ich habe nun LightBurn umfassend getestet und würde es gern kaufen.Ist es möglich, eine Lizenz auf mehreren Geräten zu verwenden?Ich habe 2 Rechner und würde gern auf beiden Geräten mit der Software arbeiten. Natürlich nicht gleichzeitig, aber mal mit meinem Computer und unterwegs mit dem Notebook.Nun kenne ich das von...
2023-11-3020010I’m trying to create a grid of short lines using perforation mode. I’ve staggered the lines since I don’t want them to touch. The vertical lines look on but the horizontal lines, which are parallel, are offset in the preview. I have no idea why. My alternative method will be to make a whole lot of short lines using the array tool....
2023-11-3022500Recently purchased an atomstack A10 to learn and play around with a Laser machine and I like the Lightburn software as well.I just want to ask about the license, it says it can be used on three machines. I only want to use two machines but I’m worried my setup may cause an issue with the licensesingI am in the UK and my ISP is plusnet and I...
2023-11-2925810Okay, I’d like to resize these texts into same width or height. I tried to use the encircled tools. It does the job but does not apply the lock aspect ratio which makes most of the text condensed or wide. Anyone please help me.
2023-11-2922510Perovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as absorbing materials. They belong to the third generation of solar cells and are also known as new concept solar cells.operational principlePerovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as abs...
2023-11-2820310Having an issue with slots. On a drawing with several slots, all 3mm, only a few actually appear to be editable.I’ve checked there are no extra nodes or rounded corners in the drawing. The drawing seems to be closed as I only see one green node. No errors are present in the dialog box.
2023-11-2821610I was using the same speed and the same power, but then it slows down a lot, but i dont know the reason, what reason can it be?I was using my laser cut machine to cut the polywood in 3mm and with the suggested speed power and pass, but then the machine just no more able to cut it through as from the beginningfor my laser the suggested speed is 350,...
2023-11-2818710I intend to cut two lines to transform the two areas into one. When I do “trim line” the line n stays in one. Then it creates open part problems. Does anyone know a way to not have to see each zone to manually join these points that don’t stay together?
2023-11-2818410Although it may be used to cut a wide range of materials with accuracy and versatility, laser cutting has several risks that should be considered before using it regularly. Certain steps need to be taken to guarantee both safety and the best possible outcomes. General safety measures for maintaining laser cuttings include the following:1. Put on ...
2023-11-2718610
- 暫無數據
繁体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski