For pulsed IR laser rust removal systems i've seen various power ratings, such as 2kW.Is this 2kW the peak pulsed power? or 2kW continuous power with a peak pulse power in the hundreds or thousands of kW?
2023-02-2310710Most of the designs I've seen for a KTP crystal mount allow X / Y angle along with rotation. I've built such a mount and in my testing I didn't find the X / Y angles to make much of a difference. Do they under certain circumstances? Crystals I've seen are cut to work parallel to the optical axis. Is flexibility here just done to account for imperfe...
2023-02-2321330Yes. It can be done, and it’s RELATIVELY straightforward as far as reprocessing goes, but it’s rarely worth the effort and expense involved; in many cases it’s both easier and less expensive to just pop in a new tube. For the most part, tubes on CO2 lasers are regarded as a consumable.
2023-02-2313910I’m trying to find the right settings to engrave this image on my diode laser with the latest version of lightburn.Before switching to light burn to control my diode laser, I was using a very generic laser control software called “laser engrave”.With that software, I was able to get precisely what I was looking for as shown on th...
2023-02-2231420I fairly new to Lightburn and I’m looking for help to cut a 4 sided polygon with one corner having an angle of 84.5 degrees. 2 corners @ 90 degress and the last corner @ 95.5. Not sure how to accomlish this in Lightburn.
2023-02-2224710Ho una corona cilindrica a denti dritti in materiale plastico "penso fibro-rinforzato" che vorrei duplicare con la mia fresatrice hobbistica proxxon ff230.I dati che sono riuscito a ottenere dalla corona sono:Denti: T 102Diametro esterno: mm 41.30 in 16.26P 64Angolo di pressione stimato con un ingrandimento a 30x sembra di 20° ma è talme...
2023-02-2218310Buongiorno a tutti ho un problema con la mia 3018. Sto eseguendo delle prove di incisione laser su lamellare da 10mm. Facendo vari tentativi ho casualmente trovato il risultato che cercavo ma non mi sono appuntato i parametri di lightburn. Posto la foto del risultato, che è nitido senza segno e marrone chiaro , invece dei vari tentativi in c...
2023-02-2221820i am a total newbie to this i have a xtool d1pro 5w. i have just installed lightburn and the origin is in the back left corner of the machine and i cannot get it to move to the front left corner of the machine and the y axis is going in the wrong direction and so are the move buttons. x positive to the right, y positive to me should be going away f...
2023-02-2230210All, Any pitfalls I should be worried about with fiber lasers? I’m currently running an 80 watt CO2 Omtech and have had good luck with it. Producing some really good stuff. Now, I want to get into metal engraving, mainly firearms. As a backup, do they work well for tumblers? Anyone use them for tumblers as a primary?
2023-02-2229920The Z stepper on my 4X8' machine is going bad. I want to upgrade all of the steppers to servos but that's a big cost and I'd like to get back up and running quickly. Is it a problem to replace just the bad Z stepper with a ClearPath Servo and related power accessories to drive it? I'm already getting ready to make the switch from Mach3 to Mach4 and...
2023-02-2127850I just cant work out the in and out pin assignments, some clarity would be awesome. I have 2 BOBs connected to my ESS. Number 1 BOB is 100% full with inputs and outputs. BOB #2 I have a bunch of pins but they are mostly all input pins shown on the ESS configuration page with just a few random ones being output pins.My question is pins 3,4,5 for ex...
2023-02-2113430I have a Bridgeport V2XT currently 3 hp intermittent and 2 hp continuous spindle. Got it running on a Mitsubishi FR-720S-100 VFD. Interested in replacing that spindle motor with a 3.7 KW and then having to change the VFD to a bigger Yaskawa so can continue running on single phase or maybe I just keep it 2.2Kw and enjoy the greater speed range? That...
2023-02-2125710I'm starting to spec out a new bench top machine build that I'm hoping to put together for some small scale project work in various different materials, though probably with a focus on aluminium plate. Realistically I'm probably looking at the more budget friendly spindles and VFDs available on AliExpress to get this moving so budget is something I...
2023-02-2112110Today I wanted to do a cut. but the Y-axis move doesn’t work! On the first try to frame the project, the Y movement stopped making the sound it does when getting to the end of the frame but the project is larger… but, it hadn’t reached the end of the frame. Now, It doesn’t move anymore, making the same sound. I loosend and ...
2023-02-2115510I have recently bought my new laser engraving Ortur Laser Master 2 s2. Testing the machine I found this problem:As can be seen, there is a kind of undulations within each figure, regardless of the speed of movement, they always appear.I hope someone can help me identify the problem.Thank you
2023-02-2125310
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski