Several key steps for cleaning laser chiller

In the process of long-term use, the laser chiller needs to be cleaned regularly to ensure its normal operation and the best use effect. The following are several steps to clean the laser chiller:

1. Prepare before cleaning. Before cleaning the chiller, we want to make sure that the power of the laser chiller is turned off, and then empty the water in the tank.

2. Clean the condenser. Use a flexible brush or hair dryer to clean the dust or oil accumulated on the surface and inside of the condenser.

3. Clean the water tank and pump. Use a flexible brush with clean water to wash the tank, be careful not to let water into the machine, and then use a special cleaning agent to clean the sediment in the pump, be careful not to leave cleaning agent.

4. Clean the fan and heat sink. Use a flexible brush or hair dryer to clean dust that has accumulated on and inside the fan and radiator.

5. Check the work after cleaning. After the cleaning work is completed, the necessary completion inspection shall be carried out, first of all, to check whether the cleaning work is thorough; Secondly, check whether the parts of each component are damaged, aging or corrosion, if so, it is necessary to replace the parts in time; Finally, turn on the power supply of the laser chiller for trial operation.

The above is the step of cleaning the laser chiller, I hope it can be helpful to you.

Source: Coolingstyle