Pay attention to the relevant temperature parameters of the chiller to improve the cooling efficiency of the chiller!

Laser chiller is a common refrigeration equipment in industrial manufacturing, which has high temperature control precision and wide application fields. The temperature of the laser chiller system has a normal temperature range, and the temperature beyond this range is abnormal, these anomalies may be caused by the fault, and may also be improperly adjusted, but we need to find out the cause and check or deal with it in time to ensure the normal cooling effect of the chiller.

1. Exhaust temperature. When the chiller is running, the exhaust temperature is too low, which will affect the heat dissipation of the motor windings and accelerate the aging of the insulating materials. Caution Caution When the exhaust temperature is too high. Do not touch it with your hands.

2. Compressor shell temperature. If the suction temperature of the refrigeration system is too high, the surface temperature of the compressor housing will exceed the normal range. If the temperature is too high, the exhaust temperature may increase, affecting the cooling effect of the cooling water mechanism. When the suction temperature is very low, the temperature of the shell surface is lower than the normal range, which will lead to frost of the compressor shell and great damage to the compressor.

3. Condensation temperature. Insufficient refrigerant; Pipe structure of chiller (water cooling); The accumulation of dust on the surface of the condenser or the fin of the condenser of the chiller (air-cooled) will lead to the abnormal temperature of the condenser of the chiller, affecting the refrigeration effect of the chiller, so we should regularly check and clean the parts of the chiller.

4. The ambient temperature of the chiller is also a temperature parameter that needs special attention. The most suitable ambient temperature of high-precision laser chiller, ultraviolet laser chiller, micro laser chiller, ultra-fast laser chiller, 3D printing laser chiller and other products developed and produced by Coolingtimes is 20~30°C, so it is recommended that the temperature of the chiller in the workshop should not exceed 40°C when working, otherwise it will cause the overload operation of the chiller. Affect the industrial production.

There are many related temperature parameters that affect the cooling efficiency of the laser cooling mechanism. The above introduces several important and common temperatures, hoping to be helpful to you. In the process of using the chiller, we need to adjust according to different use occasions, and regularly check and clean the chiller to ensure the cooling effect of the chiller.

Source: coolingstyle