English

In depth understanding of the formation of condensation rings in laser spot welding - machine learning and molecular dynamics simulation

345
2024-12-21 10:48:21
See translation

Researchers from the Pacific Northwest National Laboratory and Johns Hopkins University have reported that machine learning and molecular dynamics simulations can help to gain a deeper understanding of the formation of condensation rings in laser spot welding. The related paper titled 'Machine learning and molecular dynamics simulations aided insights into conditioned ring formation in laser spot welding' was published in Scientific Reports.

The formation of a condensation ring can serve as a benchmark for evaluating the efficiency and quality of welding in welding processes. The formation of a condensation ring is crucial because the resulting condensate will precipitate into the powder, thereby altering the quality of the uncured powder. This study investigated the complex relationship between alloy composition, vapor pressure, and condensation ring thickness through two-dimensional micrographs. To investigate this process, laser spot welding was performed on 9 different alloys, and the formation of the inner diameter and condensation ring during spot welding was studied. By utilizing machine learning models, experimental observations, and molecular dynamics simulations, researchers have explored the fundamental factors that affect the formation of condensation rings. These models are good at predicting the diameter of solder joints and the thickness of condensation rings, determining that laser power is the main determining factor of solder joint diameter, followed by physical properties such as hardness and density. On the contrary, for the thickness of the condensation ring, vapor pressure and melting point descriptors are always the most important factors, which have been validated in all models. The molecular dynamics simulation of nickel chromium alloy elucidated the vaporization kinetics and confirmed the role of vapor pressure in controlling surface vaporization. The discovery by researchers emphasizes the crucial influence of vapor pressure and melting point descriptors in the formation of condensation rings. The fusion of machine learning prediction and simulation analysis elucidates the dominant role of these descriptors, providing important insights for alloy design strategies to minimize the formation of condensation rings during laser welding processes.

Figure 1 (a) Photo of laser platform through protective glass. (b) High speed static photos of molten pool and condensate luminescence, as well as weak ionized plasma above the workpiece.

Figure 2 Top view optical micrograph of laser welded joints in SS 316 cold working (a), Ni (b), SS 316 hot working (c), Ni70Cr30 (d), Hastelloy alloy (e), Ni80Cr20 (f), Mg5Al95 (g), Ni90Cr10 (h), Inconel (i), and Ni95Cr5 alloy (j). The scale bar in the figure is 415 μ m.

Figure 3 The effect of image processing algorithms on the welding points and condensation rings of 316 stainless steel cold working. (a) Convert the original image of the solder joint into (b) grayscale image, where the inner and outer edges are identified as the solder joint diameter and the condenser ring diameter, respectively. The scale bar in the figure is 415 μ m.

Figure 4 (a) Relationship between solder joint diameter of different alloys and (b) variation of condensing ring thickness with laser power.

Figure 5 SEM-SEI images at different magnifications show a significant increase in surface condensation formation in the 20Cr sample compared to the 5Cr sample. The energy spectrum confirms that the surface condensate (orange) is mainly chromium oxide.

Figure 6 shows the Pearson correlation coefficients between all descriptor pairs in the predicted dataset of solder joint diameter and condensation ring thickness. Blue and red represent strong negative correlation (-1) and positive correlation (1), respectively.

Figure 7: Distribution of elements on the dataset.

Figure 8 Ranking of descriptor importance for predicting solder joint diameter using the CatBoost model.

Figure 9: Importance ranking of descriptors for predicting condensation ring thickness using CatBoost model.

Figure 10: Molecular dynamics model of Ni70Cr30 alloy laser spot welding process (a) t=0ps, (b) t=20ps, (c) t=30ps, (d) t=40 ps, (e) t=50ps, describing the process of atoms vaporizing from the surface to the vacuum zone. The laser heated chromatographic column displays (f) t=0ps, (g) t=20ps, (h) t=30ps, (i) t=40ps, and (j) t=50ps. The melting process continues until all atoms in the chromatographic column escape beyond the boundaries of the cubic volume, leaving no particles in the column volume.

Figure 11 (a) Changes in the number of vaporized atoms on the surface of Ni70Cr30 (black), Ni80Cr20 (blue), and Ni100Cr00 (red) over time. (b) The functional relationship between the total system pressure and time in the simulation process of laser spot welding of the same alloy.

The basic factors causing the formation of condensation rings during laser spot welding were studied using machine learning and molecular dynamics simulations, and experimental observations. A machine learning model was trained on the collected experimental data using chemical composition descriptors, physical quantities of alloys, and process parameters to predict the solder joint diameter and condensation ring thickness of various alloys. The model shows that the formation of the condensation ring is mainly influenced by the vapor pressure of the metal in the alloy. The higher the vapor pressure of the constituent metal, the greater the evaporation of atoms in the molten pool, resulting in thicker condensation rings. Molecular dynamics simulations of Ni70Cr30, Ni80Cr20, and pure Ni confirmed this hypothesis, with Ni70Cr30 having the highest number of atoms vaporized from the surface and pure Ni having the lowest, due to the higher vapor pressure of chromium (approximately 458 Pa) and the lower vapor pressure of nickel (0.44 Pa). These insights greatly promote people's understanding of the intrinsic mechanism of condensation ring formation during welding processes, emphasizing the key role of steam pressure as a controlling factor in such phenomena.

Source: Yangtze River Delta Laser Alliance

Related Recommendations
  • Rapid and convenient preparation of small-sized metal nanoparticles using microchip lasers

    Liquid pulse laser ablation is a reliable and versatile technique for producing metal nanoparticles in solution. Its advantages include no reducing agent, simple operation, high purity, no need for purification steps, and environmental processing conditions, making it the preferred method for traditional metal NP preparation.The widespread adoption of PLAL in scientific and industrial research has...

    2024-01-30
    See translation
  • Targeting military laser technology! Two major enterprises plan to establish a joint venture company

    Latest news: Rheinmetall and European Missile Group Germany plan to establish a joint venture to develop shipborne laser weapons.The cooperation between the two companies in the field of military laser technology has been ongoing for several years. In 2022 and 2023, under the framework of the High Energy Marine Laser Demonstration Working Group (ARGE), the jointly developed laser was successfully ...

    01-15
    See translation
  • Progress in Calibration of Large Aperture Diffractive Lenses in the High Power Laser Physics Joint Laboratory of Shanghai Institute of Optics and Mechanics

    Recently, the High Power Laser Physics Joint Laboratory of Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, proposed a single exposure interferometric calibration method for large aperture diffractive lenses, which provides strong support for the engineering application of large aperture diffractive lenses. The relevant achievements are published in Optics Letters as "...

    2023-10-14
    See translation
  • Nature Photonics reports a new type of nonlinear optical crystal - all band phase matched crystal

    Short wave ultraviolet all solid-state coherent light sources have the characteristics of strong photon energy, practicality and precision, and high spectral resolution. They have significant application value in laser precision processing, information communication, cutting-edge science, and aerospace fields.The core component of obtaining all solid-state shortwave ultraviolet lasers is nonlinear...

    2023-10-07
    See translation
  • Microcomb launches a simplified design for powerful lasers based on chips

    Researchers at the University of Rochester have created new micro comb lasers that go beyond previous limitations and have simple designs suitable for various applications. The research results are published in Nature Communications.Optical frequency combs are optical measurement instruments that have revolutionized atomic clocks, spectroscopy, metrology, and other fields. However, the difficulty ...

    2024-05-25
    See translation