Hola , mi maquina al momento de grabar una imagen me indica el tiempo de demora ejemplo; 4 minutos, pero en práctica no es así y se demora una hora en grabar una pequeña imagen de 40x40 mm.
2023-11-1616410SM Cinema set up SM IMAX Iloilo, showcasing the brand-new IMAX® With Laser, which is the next generation of laser projection and multi-channel sound system that provides crystal clear, realistic images and precise audio, bringing a unique viewing experience.The new system debuted with the release of The Hunger Games: The Ballad of Songbirds an...
2023-11-1611710Scientists from the UK and South Korea have proposed a new method for generating laser pulses, which have a power more than 1000 times that of existing laser pulses.Scientists are using computer simulations in joint research to demonstrate a new method of compressing light to fully increase its intensity, thereby extracting particles from vacuum ...
2023-11-1514310Lets say I have two layers that are mixed, and I saved them in Illustrator like BLUE and RED… But let’s say I want to change all RED layers to GREEN… How can I do it effectively straight in Lightburn?I now one options is selecting everything click by click… but what if I have many layers. Is there any way to select all la...
2023-11-1511210Gostaria de saber como faço pra o laser parar quando finalizar um comando, ele parar sem voltar pra o canto da maquina. Ficar parado la até eu executar um novo comando eu colocar ele pra casa. Isso é possivel?
2023-11-1515410A new experiment for verifying quantum electrodynamics (QED)Absolute emptiness - this is how most of us imagine a vacuum. In reality, however, it is filled with a flicker of energy: quantum fluctuations. Experts are currently preparing a laser experiment that will detect these vacuum fluctuations in a novel way, potentially providing clues to new l...
2023-11-1414110has anyone gone across this it works fine on fill and line but not in offset fillthanks speed 1400 power 30
2023-11-1413010Im trying to cut and engrave something that is 11.5 by 8.5 and my machine is wanting to cut and engrave it at about 8 x 8. The only settings I have changed is changing my $101 to 63.75 for engraving on a rotary.Is that something that needs to be changed back before I can go larger? How do I change the setting back and what does it need to be chang...
2023-11-1418510I am cutting out objects and have literallycut 100’s then today when I cut an object with “1 pass” selected it’s doing 2 passes? I don’t think I messed with anything anywhere else, but I know it’s always 96% user error.
2023-11-1316510Hi GuysI’m useing Lightburn 1.4,03i use Lightburn 1.4.03I make an array, but I cant select parts of it.just the original square.Circular array works Ok.
2023-11-1316710Micro light source: Researchers have constructed a laser with a size of only 300 nanometers for the first time, which can generate green light at room temperature. Nanolaser is composed of semiconductor material perovskite, which serves as a gain medium to generate photons and amplify them as resonators. New nanolasers can be used for photonic chip...
2023-11-1317510In a laser chiller, the refrigeration compressor is the heart of the entire refrigeration system and the most important one. Its main function is to compress the low-temperature and low-pressure gas from the evaporator into high-temperature and high-pressure gas, providing the source power for the entire refrigeration cycle. As the usage time incre...
2023-11-1111810I recently configured auto air assist on my MKS DLC32 board, with guidance from an article. Relay Control - Diode Laser Wiki However, I’ve encountered an issue where the board disconnects when executing the M8/M9 commands. I am using a probe pin. If I do not connect to air assist m8/m9 works fine without disconnect. Software is fluidnc. ...
2023-11-1114410I am making Christmas ornaments, and layer them out 12up. Is there a way to have Lightburn reference a single master graphic in an imposition? Sort of like the symbols in Illustrator, and a linked graphic in InDesign.For reference, the part that I edited is in black.I’d rather not have to reimpose this file every time I need to make a change...
2023-11-1112210Does anyone make recordings in thermal cups, similar to STANLEY cups? What are the recording parameters like using EZCAD?
2023-11-1114120
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski