Hello, I would like to put a blinking led before the door, when the laser is running.Is there an idea here, how to control a relais, when lightburn is running?Thanks.

Terrelle

2023-11-10

186

1

0

Hi, so my old 60w co2 laser tube died on me after a lonnnnng time of use so purchased a new one, on receiving it from the courrier it was damaged in transit one of the water inlet pipes had broke at the bend (see photos) the company had shipped me a new one but told me i can keep the broken one.The question i have is can it be fixed? I was thinking...

Clarence

2023-11-10

133

1

0

There is support for ruida?I am using rdcutist 3.02.20 beta.I have the following problems:- Frame speed is very slow, can't change it.- If I connect parts and load them into RG6563FG. Cutting occurs with a visit (not always)- Focus, axis A can only be controlled in external coordinates. - IMPORTANT: In layer, membrane mode - does not turn on t...

Pavel_TT

2023-08-30

585

23

4

Order/Invoice ID: Available upon requestIssue Product Name: Cloudray JPT M7 60W MOPA Fiber LaserIssue Description: No included drivers shipped with this unit, nor downloaded from the Cloudray site will install correctly in Win 10 64 bit machine. I have followed the guide many times. All drivers for BJJCZ FBLI-B-LV4 controller error as Code 52 / Uns...

Tory

2023-02-28

210

1

0

I have created a file on Snazzy Maps that shows only the water, specifically the Chesapeake Bay. I’m trying to set up my Kentok LE400PRO to engrave the waterline and the entire body of water about 1/8-3/16" deep so that I can fill it with colored epoxy. When I play preview it looks like it will engrave the waterline, water and the land, but l...

Gilbert

2023-11-09

143

1

0

I’m trying to connect the barn and tree outline to the oval to create a closed shape. I’ve edited nodes and tried auto joining. The boolean operations are greyed out. I know I’m missing something. To clarify I I’d like to end up with a closed shape that incorporates the barn trees and bottom part of the oval.

Cyril

2023-11-09

136

1

0

Good evening, everyone,I use lightburn with two different types of lasers; a traditional CO2 and a Galvo fiber that I added very recently.When I write text with the CO2. it is normally written correctly.However, when I do the same with the Galvo fiber, it etches it to me mirrored (upside down)I have searched the settings and the internet for a poss...

Darren

2023-11-09

148

1

0

If I want to use my PC for other things, including rebooting, disconnecting, etc., while the laser is running, what would my setup look like?Raspberry Pi with Octoprint? Does for example the “Frame” button still work with that? Does it work with the “Ethernet/TCP” connection in LightBurn?There’s probably not enough mem...

Smith

2023-11-08

127

1

0

Hey,ich hab seitdem ich meinen LM3 habe folgendes Problem, das der Laser sporadisch nicht durchschneidet. Bis heute dacht ich es liegt am Holz, an der Struktur oder an der Verleimung.Nun bin ich mir aber nicht sicher ob es vielleicht doch am Laser oder an irgendwelchen Einstellungen zu tun hat.Ich schneide seid Tagen schon das gleiche Muster aus un...

Williams

2023-11-08

163

1

0

HiIm struggling to align laser beam with my new laser tube. each time I successfully align it Im having to do it again after 5 minutes. Any help is much appreciated.for OMTECH 60wThank you

Abel

2023-11-08

142

1

0

Is it possible to speed up an engraving or change the number of passes while it is engraving? Or can that only be done before the engraving starts?

Kevin

2023-11-07

152

1

0

I cannot get an image from my new camera that I purchased form YoraHome. Black image only.

Marshall

2023-11-07

196

1

0

Does anyone have any idea why when I’m trying to cut the second pass it goes off the line?Please look at the attached image:

Keegan

2023-11-07

140

1

0

Is it possible to create a macro switch that can be turned on ans assign the switch to park the laser head up and out of the way of where it just finished?This is related to a previous post about me making small 50x50mm round engravings and swapping new ones in.This would be useful for a LOT of things I do.I know with my 3d printer / CURA i can add...

Jamie

2023-11-06

144

1

0

I have a 100watt mopa Galvo and its not filling all shapes individually on some designs I noticed this when I traced an image in lightburn and set it to fill individually It still would fill the entire thing at once, I have already tried ungrouping the shapes and still no luck. On version 1.4.03 running on a M1 Max.

Henry

2023-11-06

135

1

0