All of the sudden, all my images appear upside down when I view them in preview mode. If I reset my device setting to the top-left instead of the bottom-left, they simply reverse. Before today, an image looked the same in both the work area and when I previewed it.
2023-04-0410210A file I uploaded won’t cut or engraving because of “no output layers selected for output” error message. The thing is…in the cuts/layers screen there is not an “output” toggle. Can someone please help me?Thank you
2023-04-0416810We all know the three-ring, in which the current ring is adjusted by the driver itself, we need to do the work is to adjust the outside speed ring and position ring, inside this is the classic PID control,When we carry out positioning control, the speed curve and displacement curve will be planned in advance, and then the PLC is sent to the servo ...
2023-04-0419510Water is a good cooling medium, but all kinds of water contains dissolved solids, gases and various suspended substances to varying degrees, in the water cooling system will cause such as sediment (scale, silt, corrosion products and biological sediments), corrosion, microbial (bacteria, algae) propagation and other problems, to the safe and effici...
2023-04-0414600Gear is one of the commonly used parts in mechanical transmission. It is a device that transmits power and motion through the meshing relationship between the rack and gear. A gear usually consists of a group of meshing gears and shafts. The number and shape of the gear teeth are different, which can achieve different transmission ratios and transm...
2023-04-0427300Modern lightweight structures have long helped save fuel and materials and reduce the environmental burden of automotive engineering and the aircraft industry. Researchers at the Fraunhofer Institute for Materials and Beam Technology, IWS, have now found a way to transfer this proven design principle to other industries.To do this, they used lase...
2023-04-0430900An ultra-efficient on-chip supercontinuous laser developed by researchers at the University of Twente holds promise for applications ranging from portable medical imaging devices to chemical sensing and lidar. The researchers' design is able to control the dispersion of light in the laser system by alternately widening and narrowing the beam.Lase...
2023-04-0428700has a problem with Trocen product anyone help? im from mexico
2022-11-1615020Hi there,I wanted to share the gradient charts i’ve created, because i find them extremely useful. They are set to be done on an A4-sized material (297x210mm) but you can of course resize them as you wish.You will find all charts in Lightburn format herebelow.Speed and Power values should be ok with most of the recent machines, like X-tool, ...
2023-04-0118620Professor Ma Cheng of the University of Science and Technology of China (USTC) has proposed a new technology route for all-solid-state battery cathode materials, which can significantly increase the amount of active material in the composite cathode, thus more fully realizing the energy density potential of all-solid-state lithium batteries. The re...
2023-04-0328810Is it possible to laser cut mat board from Dollar Tree for making mat board for picture framing?
2023-04-0323910Imported an image into LB file many weeks/months ago, how can I find out what the original image was when imported? Want to make some adjustments to img, but can’t find. Possible or not?
2023-04-0323210Hello! I am unable to control the laser machine Sculpfun S30’s power intensity. It only works at one (low) level of power intensity, and I can’t change it. Any help will be much appreciated. Thank you in advance.
2023-04-0315210I have a Creality Falcon, when I use a TF card Frame will show the laser and where it’s going to work, however when I plug it into my computer Lightburn does not show the laser while doing a Frame. I have the laser turned on while framing on and the fire button is also on. Am I missing something?
2023-04-0330510I’ve just installed it, the device is connected as can be seen from the highlighted line in the terminal in the screenshot, but nothing shows up. I’ve added myself to dialout and tty, as per these instructions but it just doesn’t work.What am I missing?
2023-04-0310810
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski