During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.
2022-12-3025011Switch to the manual state, press the Z+and Z - buttons on the operation panel, and the Z-axis motor will not move.
2022-12-3026421When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.
2022-12-3032410After cross cutting correction, the cross cutting is not aligned, and there is still offset.
2022-12-2427610The panel did not prompt hard limit protection when Z-axis reached the hard limit switch.
2022-12-2432610When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certain length, and then the laser cutting stops. (Automatic blocking does not work)
2022-12-2430010Press Z-axis to move manually on the panel, and the cutting head does not move
2022-12-2332710When working, there is light. Press the Spot button and there is no light
2022-12-2334110What should we do if the laser keeps emitting light?
2022-12-2328511USB is not connected (with COM port)
2022-12-2024020Setting the cutting point is invalid.
2022-12-2018110Precision adjustment of glue sprayed upper.
2022-12-1933110
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski
