Recently, the research and technological development work in plasma physics and fusion energy at the SLAC National Accelerator Laboratory of the US Department of Energy has received support and promotion from LaserNetUS for up to $28.5 million.It is reported that the Science Office of the US Department of Energy has allocated $28.5 million to pro...
2023-10-31148101. Evaporator small temperature difference: used to evaluate the heat exchange efficiency of the unit evaporator, with a normal value between 1 ℃ and 3 ℃.Evaporator small temperature difference=outlet temperature of chilled water - saturation temperature corresponding to evaporation pressureNote: The saturation temperature corresponding to the outl...
2023-10-3119011error 5 autoguiado no esta habilitado en la configuracion de Grbl
2023-10-2814010The update overlay button keeps turning grey and I need to choose from the camera drop down menu “none” then choose lightburn camera to get it back. It does this often while I am working on a design. It seems that it started happening since the last update. Anyone else experiencing this or know how to to repair this?
2023-10-2819310Hi everyone. Sorry if i placed this in the wrong section.Yesterday, I recieved my Aeon Fiber Laser ST50J. I was playing with some materials I had, and as I was testing and testing. I’d save the settings where I thought were good, in the library. Came back today and everything I had saved from yesterday is gone.Would anyone know what I could...
2023-10-2821610I have lost t the “select objects” option from my laser drop down menuThank you
2023-10-2713410I’ve been using Lightburn to cut out some veneers for a job over the past year. Each unit contains 5 closed shapes that are identical and I have 4 units worth set up across the bed. So 20 identical shapes that should all cut the same.I’ve recently started noticing that some of my veneers are loose fitting. After a while I figured out t...
2023-10-2711810I am making the finger joint box for the coasters. It has worked beautifully before. Now two sides are right but the other two, the bottom fingers are correct but the side ones are too big. Looking at the program, they are right, fit perfectly on the screen but are off when lasered. Weird. Also circles are oval. This all happened after the new upda...
2023-10-2714910AutomationDirect now offers SureServo2 servo systems that accept 460 Vac three-phase input power. With output power from 400W to 15kW, these 12 new perfectly matched sets of servo motors, drives, cables and accessories have all the features of our existing SureServo2 servo systems: onboard motion controller with registration, electronic camming and...
2023-10-2614010I’d like to use a Calcomp digitizing tablet to input blueprints of parts to cut out with my laser. Is there a way to set up such an input tablet (Roll-Up 3036 III) in Lightburn?TIA,GT
2023-10-2612410Lightburn v1.4.03 on Win 10 machine is not working. Offset outward actually offsets both directions. Offset inwards does nothing. Offset both works as intended.
2023-10-2617510Hi, I am new here,I use ubuntu and my notebook is a Acer Aspire 5.The problem is not show layers. I can’t select colors.
2023-10-2613710Recently the laser quietly stopped firing in the middle of a simple job. It was just cutting a straight line at about 20mA.The rest of the machine still works normally. No error messages. The power supply’s fan is running.What I’ve tried:Controller Pulse button = nothing happens. No movement on ammeter, and laser doesn’t fire.Test...
2023-10-2516610HiWhat is the reason that the laser cuts great in the Y axis but worse in the X axis?
2023-10-2515510cutting 1/2” foam sheet into 1” circles. Start point and end point don’t quite meet up. Can I make laser go slightly past the start point so it cuts complete circle and cut pieces will cleanly fall out of scrap sheet.
2023-10-2519010
- Δεν υπάρχουν δεδομένα
Ελληνικά
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski