I recently updated my sculpfun s9 with limit switches, following the youtube video provided, i learned that where the laser hits the limit switches and where Lightburn sees the laser, is not the same. Lightburn sees it at being X: -377.00 Y: -392.00 Z: 0.00. Would there be a way to make its current position the new 0,0 ?

Tory

2023-10-18

187

1

0

I’m using a Razor 3 130Watt C02 Laser and I am having trouble with cuts. I am having to use multiple passes to cut through this 3mm particle board, but somehow our 50watt Epilog still is getting cleaner cuts with one pass. I’ve tried running 130Watt at 60/55% power at 35mm/s. To actually cut with the 130Watt laser I’m having to ru...

David

2023-10-18

186

2

0

I have my lasers in a a shop with wifi and one in another shop does not have wifi, I take the laptop to each one. Can I request OFFLINE activation on the same computer and use it on and off line? Example, can I bounce back and forth using the wifi or the offline? Or once I get the activation for offline will it mess up my using wifi on that compute...

Henry

2023-10-17

171

1

0

When is use Frame to position my design the Frame size outline is always larger than the design. Yet when I run the file the design is exactly what size Lightburn shows it should be.

Robert Evans

2023-10-17

144

0

0

Help me pleasALARM:2The G-code motion target exceeds the machine travel. Maintain the machine position safely. The alarm can be unlocked. (Right click on the “Devices” button to reset the connection).On or near line 3:I get this error does anyone know about this error?

John Trant

2023-10-17

129

1

0

looking to make a door hanger how do i get the pattern into the inside as in pic .confused

roy

2023-10-16

140

1

0

Hello,I have just cleaned my laser top to bottom but I can’t figure out where this plug is supposed to go. It is a part of the air assist fan, but I don’t see a port for it to plug into.It is a tiny white plug that is on the brushless DC fan. Please help!

jessie

2023-10-16

137

1

0

I am engraving on slate and I have developed a problem. I created the file and run my material test to find the best setting for my 20w Diode Mr. Carve. The first 5 time I ran the engraving there were no issues with filling in all the areas, but on the 6 run I developed a problem filling in the corners. On the 6 run I was adjusting the power level ...

Patrick

2023-10-16

140

1

0

Laser chiller is a cooling device used for cooling and constant temperature control. When it cannot maintain a stable temperature, various problems may occur. The following are some possible reasons and solutions that may cause the temperature of the chiller to be unstable. You can refer to them to solve the problems encountered by the chiller duri...

Vasili

2023-10-14

129

1

0

Hello,I have a Mira 7 and interested in getting the lightburn camera for it but don’t know which option to choose from the many angles offered. Which one works if I mount in the lid?Thanks,Aaron

Payson

2023-10-14

154

1

0

Hello to all.I have all of my libraires and files saved and shared on a network storage. It makes it easy for me to access and share my libraries between my several different computers with LB installed.I’ve recently run into a question. Do art libraries, and material libraries reload themselves upon each fresh launch of LB? I would assume so...

Terrelle

2023-10-14

165

1

0

I have been reviewing all of the posts on this site for image tracing but not able to figure out the issue I am having… I would like to put this image on a glass, without the black backgrounds (once you convert it in Lightburn)but each time I try to trace it and take out the black backround parts of the feathers also disappear. I took it int...

Clarence

2023-10-14

121

1

0

Run time error 2147467259 (80004005)Object not found in collection.How can i fix this? It still works but it's very annoying because even just changing tabs the error pops up.RDworks version 8.01.60, coreldraw 2017, installed the plugin selecting the path to corel and chosing corel 2017 on the dropdown menu.TIA

Sfynx

2023-10-11

163

1

0

When I use the Mac version of LightBurn for cutting, no matter what cutting speed I set in LightBurn, the actual machine cutting speed is only 1mm/s. The version of LightBurn is 1.4.03, and the controller for the CO2 laser is Ruida 6445G. I do not experience this issue when using the Windows version. Both default switches are turned off.

Williams

2023-10-13

136

1

0

Hi I am having a bit of a problem, yesterday machine working fine but today it only wants to cut or engrave at 1mm per second no matter what I set it at. I have reinstalled l burn but just the same. Not sure if it is a machine or l burn issue. Thanks

Smith

2023-10-13

195

1

0