English

The acoustooptic modulation of gigawatt level laser pulses in ambient air can be applied to other optical components such as lenses and waveguides

108
2023-10-12 13:59:58
See translation

An interdisciplinary research group, including the German synchrotron radiation accelerator DESY and the Helmholtz Institute in Jena, Germany, reported that invisible gratings made of air not only are not damaged by lasers, but also maintain the original quality of the beam.

The relevant research has been published in Nature Photonics under the title of "Acousto opt modulation of gigawatt scale laser pulses in ambient air".

From gravitational wave astronomy, quantum metrology, ultrafast science, to semiconductor manufacturing, controlling the intensity, shape, direction, and phase of coherent light is crucial in many fields. However, modern photonics may involve parameter regions where wavelength or high optical power limits control due to absorption, light induced damage, or optical nonlinearity in solid media. Here, researchers suggest using high-strength ultrasound customized gaseous media to avoid these limitations.

Researchers demonstrated the implementation of this method by effectively deflecting ultrashort laser pulses in ambient air using ultrasound without the need for transmitting solid media. At a peak optical power of 20 GW, the deflection efficiency of the researchers exceeded 50% while maintaining excellent beam quality, exceeding the limit of previous solid-state based acoustooptic modulation by about three orders of magnitude. The researchers' methods are not limited to laser pulse deflection; The gas-phase photon scheme controlled by sound waves may be used to implement new optical components such as lenses or waveguides, which can effectively resist damage and operate in new spectral regions.

This innovative technology utilizes sound waves to modulate the air in the area where the laser beam passes through. Researchers have generated an invisible grating using acoustic density waves.

With the help of special speakers, researchers have formed areas of high and low density in the air, forming stripe gratings. Due to the difference in air density, the light in the Earth's atmosphere bends, so this density pattern acts as a grating, changing the direction of the laser beam.

In the first laboratory test, the efficiency of reorienting strong infrared laser pulses in this way was 50%. According to the numerical model, higher efficiency should be achieved in the future.

In this animation, a laser beam passes through a speaker reflector array, which generates an air grating. The interaction between the laser beam and the grating causes deflection without contact. Source: DESY Science Communication Laboratory
The research team believes that this technology has great potential in the field of high-performance optics. In the experiment, researchers used infrared laser pulses with a peak power of 20 gigawatts, which is equivalent to the power of approximately 2 billion LED bulbs. This type of laser with even higher power levels can be used for material processing, nuclear fusion research, or the latest particle accelerators.

Scientists emphasize that the principle of acoustic control of lasers in gases is not limited to the generation of optical gratings. It is likely to be applied to other optical components such as lenses and waveguides.

The technology of directly deflecting light in ambient air has been confirmed, opening up promising applications, especially as a fast switch for high-power lasers. Modern optics is almost entirely based on the interaction between light and solid matter. The researchers' methods have opened up a new research direction.

Source: Sohu

Related Recommendations
  • Laser giant nLIGHT's preliminary performance forecast for the fourth quarter of 2024

    Recently, nLIGHT, a manufacturer of high-power semiconductors and fiber lasers, released its preliminary performance forecast for the fourth quarter of 2024.According to disclosed information, nLIGHT expects its revenue for the fourth quarter of 2024 to be between $46 million and $48 million, lower than the estimated range of $49 million to $54 million when it released its third quarter results on...

    01-16
    See translation
  • Scientists have created a full spectrum white light laser with bright spot, smooth and flat spectrum, and large pulse energy characteristics

    Recently, the team led by Professor Li Zhiyuan from South China University of Technology has successfully developed a full spectrum white light laser, which has the characteristics of bright spot, smooth and flat spectrum, and large pulse energy. It can cover the ultraviolet visible infrared full spectrum of 300-5000nm, with a single pulse energy of 0.54mJ.The launch of such a full spectrum white ...

    2023-11-07
    See translation
  • University of California, Los Angeles Joins the American High Power Laser Facility Alliance

    The University of California, Los Angeles is joining LaserNetUS, a high-power laser facility alliance established by the Department of Energy, aimed at advancing laser plasma science.Unique facilities are located in universities and national laboratories across the United States and Canada, providing a wide range of opportunities for researchers and students.The Phoenix Laser Laboratory at the Uni...

    2023-09-15
    See translation
  • Micro ring resonators with enormous potential: hybrid devices significantly improve laser technology

    The team from the Photonic Systems Laboratory at the Federal Institute of Technology in Lausanne has developed a chip level laser source that can improve the performance of semiconductor lasers while generating shorter wavelengths.This groundbreaking work, led by Professor Camille Br è s and postdoctoral researcher Marco Clementi from the Federal Institute of Technology in Lausanne, represe...

    2023-12-11
    See translation
  • Artificial intelligence accelerates the process design of 3D printing of metal alloys

    In order to successfully 3D print metal parts to meet the strict specifications required by many industries, it is necessary to optimize process parameters, including printing speed, laser power, and layer thickness of deposited materials.However, in order to develop additive manufacturing process diagrams that ensure these optimal results, researchers have to rely on traditional methods, such as ...

    2024-02-27
    See translation