Hello! I have protruding extra lines on my text engrave (on black painted tile with 900 mm/m speed and 70% power):The image shows 3 trial:1. Imported vector shape2. Imported vector (with 90 scan angle)3. Imported raster image of textThe error still occures, and it seems that the position of the extra lines are staying the same. Any ideas what co...
2023-03-0318310I need urgent help, the laser is not cutting perpendicular and when the laser goes to the origin it does not reach the same distance on the right and left sides.We have disarmed and reassembled the laser. We have verified the tensions of the belts on both sides to see if that is the problem, and we do not know what it could be.We need someone to he...
2023-03-0330810I am using the latest trial versions of LightBurn (1.3.01) on two different machines. I designed one project on one of them then tried to import on to the other machine which is connected to the xTool Di Pro. Set everything up and attempted to print. The design was basically a 4 in diameter Christmas ornament. All looked good even the preview displ...
2023-03-0314310Everything else seams to be working fine with the exception of the home tab. When I press the home button it acts like the extensions are not there. I have checked the setting and uninstalled and reinstalled the xtool. Not sure where to go from here.
2023-03-0327310Panasonic MSMF series servo motors, 50W and 100W are all suitable for the same type of drive. The original 50W motor is used, but now the 100W motor is replaced. Is its current, torque and other parameters adaptive? Does the torque monitor output signal including IM terminal correctly reflect the motor torque after replacement?
2023-03-0216610Has anyone found the gcode string to deactivation the fire sensor on an XTOOL D1 PRO. The fire sensor is very sensitive and I would like to use a macro to turn it off before each run.
2023-03-0218810Buonasera, ho poco acquistato un centro famup mcx 600, la macchina aveva le batterie del cn esauste e il plc in errore "stop plc".Sostituito le batterie , il cn si accende non mi da errori ma non mi cambia le modalità mi rimane sempre in JOG e gli assi non si muovono.Può essere che sia rimasta per molto tempo senza batterie e abbia pe...
2023-03-0226710Ciao a tutti,Su una macchina morbidelli/scm ho un motore dedicato per fresature orizzontali. Il motore è verticale ma la fresa è rinviata tramite ruota dentata.Sul manuale della macchina non fa menzione di interventi periodici di lubrificazione del meccanismo, eppure sul corpo del rinvio c’è un tappo per l’olio.Sono...
2023-03-0219310I have recently changed the size of my Ortur LM2 Pro from the stock size to 80mm in the Y direction. I have changed the sizes within Lightburn to reflect the change. After drawing a 400mm x 800mm rectangle within the software, lightburn informs me I am out of the working area every time I try to frame the box. I checked to make sure I was within bo...
2023-03-0224410Recently, a team from the Fraunhofer Institute of Laser Technology (ILT) and the Leibniz Institute of Atmospheric Physics (IAP) in Germany has developed a portable lidar system that can move independently. Such systems can be produced on a large scale and combined into an operational network to provide real-time high-quality data of temperature and...
2023-03-0227100How to select a suitable linear motor module to maintain the stability and efficiency of the equipment.Linear motor selection elements:1. The movement load, the maximum load that can be borne (the safety margin is 80%), and the movement center of gravity deviation.2. Linear motor installation mode: horizontal installation is the best way under the...
2023-03-0228300How do I change the settings in Lightburn so it knows the laser is now twice as powerful
2023-03-0120610Hello I made a circle and drew a line through it and I tried to edit nodes using “t”. It didn’t do anything. Also, it doesn’t seem to allow me to add nodes to circle shapes.
2023-03-0126710Why do I have to flip everything Vertical to get it correct on the surface I am engraving?
2023-03-0115920I am looking for help with my Ruida 6445G Controller. The problem is the Z Axis. I have tried multiple options. Trying to get the Z Axis to show me in mm the actual length is not happening. For 100mm on the Controller is only about 4mm movement. I tried using the Auto calculations of Entering this information and the stepper was set at 0.2 which th...
2023-01-30168112
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski