Key technologies of laser cutting system for pipes1. Light guide focusing systemThe function of the light guiding and focusing system is to guide the light beam output by the laser generator to the cutting head of the focusing light path. For laser cutting pipe, to get high-quality slit, it is necessary to focus the beam with small spot dia...
2022-05-2723500On May 26, Jinan municipal Party committee and government held a press conference. The reporter learned from the meeting that Jinan will hold the "2022 World laser industry conference" from June 24 to 26, 2022.Jiazhongqing, director of the laser Research Institute of Shandong Academy of Sciences, introduced that Jinan, as the largest laser ...
2022-05-2721200Faucet is the popular name of water valve. It is used to control the size of water flow and has the function of saving water. From the old cast iron technology to the type of electroplating knob, to the stainless steel single temperature and single control faucet, the stainless steel double temperature and double control faucet, and the kitchen sem...
2022-05-2630200Iron and steel metallurgy industry is the basic industry of the country. At the same time, it belongs to the country's heavy industry, with complex equipment, many types and heavy tonnage. Due to friction, wear and other reasons, a large number of spare parts will be consumed every year to maintain the normal operation of the equipment. Therefore, ...
2022-05-2614200As we all know, fiber laser has become one of the main industrial lasers in the world. Compared with semiconductor lasers, solid-state lasers and CO2 lasers, fiber lasers have accounted for more than 50% of the global industrial market.In the past, punch and plasma cutting were mainly used in the field of plate processing, in which punch was used ...
2022-05-25270001、 Lasys laser exhibition in Stuttgart, GermanyExhibition time: June 21 ~ June 23, 2022Organizer: Stuttgart exhibition companyVenue: new Stuttgart Convention and Exhibition CenterHolding cycle: once every two yearsExhibition area: 30000 square meters number of exhibitors: 500 number of visitors: 28000Official website: https://www.messe-stuttgart.de...
2022-05-2421300When user use RDC6442G or RDC6442S to do a cutting and engraving, different auxiliary gas pressure should be set according to engraving and cutting . usually engraving should set a low pressure auxiliary gas and cutting should set a strong gas .For RDC6442 series， there is only a port named <wind> to control auxiliary gas. here is a ex...
2022-01-2425802Description of the auto-focus functionThere are 2 options for the auto-focus function in RD controllers. See the picture below.  ...
2021-11-2922700RD Controllers has USB and Ethernet port for data sending. For some cases, if the USB port is burnt out, User can try the Ethernet port to make the controller working. user can follow the steps to set up a Ethernet connection with RD controllers.1 Prepare a Ethernet cable and make sure the cable can do a correct internet connection.2 Connect the ca...
2021-10-2921800RDC6445G and RDC6445G has the same function and the performance!The only difference is the operating panel; the dimension of operating panel is different. that has more option for machine manufactures to install the panel because of the different dimension of the machinebut here should be noticed:The update firmware of the operating is differ...
2021-10-2924600"Engraving with RF co2 laser. 20KHz. dual-direction engravingsee the stripes on the engraving shape. but when do a single-direction engraving, everything is ok.see below:According to the motion controller, the motion is not different with the motion and only the direction is changed. the acceleration stage , constant speed stage and decelerat...
2021-10-2624800"Usually user does a job with many hatch vectors, the vectors are not alignment when finished the cutting. look the picture below:here we can see there are some vectors is out of the contour of the shape. but the correct cutting result is like the below:the cutting error is caused by the motor's responsibility and the controller. if the motor respo...
2021-10-2622200"The dm4400m that I am retrofitting has a spindle motor that I’d like to salvage if possible.It appears to be a DC servo drive motor180vdc with 11nm stall torque per the label.It says it’s a model MT 40ZD4-45 motorAny suggestions on a drive to run this motor"
2021-09-2921300"I am pretty new to machining and have been tasked with using this machine for creating one-offs and prototypes:https://www.ebay.com/itm/20280771500....c100010.m2109The problem I am having is that every time I try to use a keyseat cutter to do an undercut or cut a simple O-ring groove, the stepper motors start to skip steps or something and then th...
2021-09-2923200"Researchers in Germany think they’re close to developing a more economical alternative to machine tools for many milling applications. The alternative is a robot arm for precision machining. Conventional industrial robots can be used for milling but are no match for machine tools when it comes to precision. Primarily because of the gear units, rob...
2021-09-1616100
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski