In servo torque mode, the speed limit value is controlled by analog quantity, and the torque limit signal is used to achieve the purpose of screwing.At present, the problem is: when the torque limit signal is output, you want to judge whether it is screwed in place. How do you realize this working condition? What is the convenient way?In addition, ...
2023-03-0427010Which control mode is generally used for servo press?
2023-03-0325210For example, Siemens SMART PLC, SMART LINE screen, for example, the motor starts at the set time, stops at noon and evening rest time, and the rest time (settable) automatically starts and runs.
2023-03-0331210How to select a suitable linear motor module to maintain the stability and efficiency of the equipment.Linear motor selection elements:1. The movement load, the maximum load that can be borne (the safety margin is 80%), and the movement center of gravity deviation.2. Linear motor installation mode: horizontal installation is the best way under the...
2023-03-0232900Done a new build with Annoy tools Board double Y axis (newish to game) The build is A1 all brand new The X Axis just makes a little noise doesn’t do anything all the cables are okay and swapped motors around all A1 Any help…
2023-02-2320410The Z stepper on my 4X8' machine is going bad. I want to upgrade all of the steppers to servos but that's a big cost and I'd like to get back up and running quickly. Is it a problem to replace just the bad Z stepper with a ClearPath Servo and related power accessories to drive it? I'm already getting ready to make the switch from Mach3 to Mach4 and...
2023-02-2132650I have a Bridgeport V2XT currently 3 hp intermittent and 2 hp continuous spindle. Got it running on a Mitsubishi FR-720S-100 VFD. Interested in replacing that spindle motor with a 3.7 KW and then having to change the VFD to a bigger Yaskawa so can continue running on single phase or maybe I just keep it 2.2Kw and enjoy the greater speed range? That...
2023-02-2130310I'm starting to spec out a new bench top machine build that I'm hoping to put together for some small scale project work in various different materials, though probably with a focus on aluminium plate. Realistically I'm probably looking at the more budget friendly spindles and VFDs available on AliExpress to get this moving so budget is something I...
2023-02-2116910Today, I measured two dozens of Ford and several hundreds of Ford. Why is the three-phase unbalance?
2023-02-2033810Yesterday I began to hear some noises from my spindle motor - a high frequency "whining" or "whistling", it's intermittent and varies depending on speed. So I suspect the bearing - how easy are those to change yourself? It's an Omio X8-2200L-USB:I have some skills in mechanics and have repaired/refurbished motor parts as generators, starting moto...
2023-02-1818710Torque motor is a special type of brushless permanent magnet synchronous motor. Since the load is directly connected to the rotor and no transmission parts are required, the torque motor belongs to the direct-drive motor.The following is the difference between torque motor and servo motor:Different performance1. Torque motor: a special mot...
2023-02-1731500Basic requirements1. High displacement accuracyDisplacement accuracy: refers to the compliance between the displacement of the machine tool workbench required by the command pulse and the actual displacement of the workbench converted by the servo system.2. Good stabilityStability: refers to that the servo system can reach a new or return t...
2023-02-17289001. Initialization parametersInitialize parameters before wiring. On the control card: select the control mode; Clear PID parameters to zero; When the control card is powered on, the enable signal is turned off by default; Save this state to ensure that the control card is in this state when it is powered on again.On the servo motor: set the...
2023-02-1612900What work needs to be done before starting the servo motor1) Measure the insulation resistance (not less than 0.5M for low-voltage motors).2) Measure the power supply voltage and check whether the motor wiring is correct and whether the power supply voltage meets the requirements.3) Check whether the starting equipment is in good condition.4)...
2023-02-1618700The servo in the industrial control industry is generally the abbreviation of AC servo system. At the project site, the servo we refer to is the servo driver. However, servo driver and servo motor are an inseparable system, and they are connected by encoder cable and power cable. Generally, the servo driver bears the control command of the controll...
2023-02-1533500
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski