Laser marking is currently one of the most widely used laser processing technologies. Its principle is to use a highly concentrated laser beam to instantly evaporate part of the material surface, forming an indelible mark. Laser marking has the advantages of fast speed, good texture, and high accuracy, and has been widely used in many industries su...

Durell

2024-05-15

88

2

0

Laser marking is currently one of the most widely used marking and processing methods. The patterns or text produced by laser marking have a good texture and are indelible. They are often used in packaging, advertising, cables, consumer electronics and other products. Laser marking can be applied in both large-scale factories and small workshops, b...

Andrej

2024-05-15

85

1

0

In the field of material processing, laser technology has gradually become the preferred choice for industrial processing. Whether metal or non-metal materials, lasers can efficiently and accurately complete processing tasks, and achieve no deformation, small thermal reactions, and smooth edges. At present, laser processing tasks include cutting, c...

Patrick

2024-05-13

72

1

0

UV laser is a special type of laser. Compared to CO2 laser and fiber laser, UV laser emits laser wavelengths ranging from 100 nanometers to 400 nanometers, in the high-frequency range between visible light and X-rays. Within this wavelength range, ultraviolet laser has a very high energy, strong penetration and absorption, and is suitable for many ...

Abel

2024-05-09

74

1

0

Ultra fast laser refers to a laser with a very short pulse width. Compared to ordinary laser, ultra fast laser has a smaller thermal impact on the material due to its short pulse width, and the deformation generated can be almost ignored. Therefore, it can achieve higher precision laser processing. At present, the application of ultrafast lasers is...

Jack Wilborn

2024-04-29

91

1

0

The visual laser control system is a new type of CNC system that combines visual recognition technology and laser control technology. Its principle is to identify the processing object through visual technology, and control the laser control to precisely process the target by positioning the processing object. Compared with ordinary laser control s...

David

2024-04-11

72

1

0

A research team from the University of Alto in Finland has explored and implemented a new mechanism for laser operation. Through this mechanism, users can remotely control plasma nanolasers using a magnetic field.Previously, the only way was to "switch" plasma nanolasers through direct operation. However, with the development of topological photo...

Henry

2024-04-10

125

1

0

A stepper motor is an actuator that converts electrical pulses into angular displacement. When the driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle in the set direction (known as the stepper angle) and rotate at a fixed angle. The angular displacement can be controlled by controlling the number of pulses to achiev...

Christian

2024-03-25

74

1

0

Panasonic driver MFDKTA390E-3KW motherboard is broken. A 750W motherboard has been replaced and an ERR.95 alarm has been triggered when powered on (motor and driver do not match). Please advise on how to modify the power value. The manual does not modify the power parameters.

Robert Evans

2024-02-28

86

1

0

1. Microcontroller systemUsing a microcontroller system to achieve motion control has a lower cost, but the development difficulty is high and the cycle is long. This solution is suitable for users with large product batches, simple control system functions, and experience in microcontroller development.2. Professional motion control PLCMan...

Miller

2024-02-18

88

1

0

Siemens has innovatively upgraded its highly favored SINAMICS S210 servo drive system, further expanding its application range by adopting a new hardware architecture and next-generation V6 software.This servo drive system is suitable for high dynamic applications with a power range of 50W to 7kW, and can better support industry applications such...

Smith

2024-02-03

87

1

0

Who has DVPHE3PLC? How to read data from the upper computer using 232? What data needs to be noted

Abel

2024-02-03

84

1

0

With more and more technologies widely applied in industrial automation, we have entered the era of Industry 4.0. New technologies continue to emerge, empowering artificial intelligence and machine learning, data analysis, industrial networks, network security, and functional security. However, most industrial automation, as the core of all other t...

Jamie

2024-01-31

182

1

0

ECI and PCI advantages1. ECI:1) No need to rely on industrial computers, which can reduce the configuration requirements of PCs and reduce the volume of industrial computers;2) No need to install PCI drivers, one network cable solves the problem;3) Regardless of the number of axes, all products call a set of API functions;4) No need for PCI adapte...

Cruise Wang

2024-01-29

157

2

0

1. Controller: used to generate trajectory points, i.e. expected output.2. Driver: Used to convert control signals (usually speed or torque signals) from motion controllers into higher power current or voltage signals, and output them to actuators.3. actuators: such as hydraulic pumps, cylinders, linear actuators, or motors, used to output motion.4...

Henry

2024-01-29

143

1

0