I have been trying to find out if there is a way to turn down the power supply to match my tube. I did a ramp test and my tube is rated to max out at 26ma but the controller is only at 70%. I want to make 26ma 100% so no one over drivers the tube. Is this possible?
2023-03-0626110The servo motor is used with the reducer, such as the planetary reducer. The reducer has a reduction ratio. The servo motor outputs the specified speed. After the reducer decelerates and increases the torque, will the speed accuracy of the output shaft of the reducer be improved? Or does the reducer affect the speed accuracy of the servo motor? Is ...
2023-03-0431810The reason why the motion control card cannot be connected
2023-03-0427710The response speed is a very important index to measure the motion control system. In addition to the response speed, there are also some important parameters related to product quality and production efficiency:1. The number of axes supported by the controller and the performance of multi-axis linkage and cooperation.2. Accuracy of...
2023-03-0419900Panasonic MSMF series servo motors, 50W and 100W are all suitable for the same type of drive. The original 50W motor is used, but now the 100W motor is replaced. Is its current, torque and other parameters adaptive? Does the torque monitor output signal including IM terminal correctly reflect the motor torque after replacement?
2023-03-0222010Laser week, we developed a new postprocessor for plasma bevel cutting machine, the control START Sharpon is used on it.Thanks for the new tool management feature involved in CutLeader V6, we could add severial tools with different bevel angle and the enty/exit radius.Based on the tool assignment rules, the bevel tool can be assigned to contour auto...
2023-02-2714820Hi all,I have a D.I.Y. build 130W with a Cloudray MYJG-150W.Everything has been running great for a few weeks and now the laser will only fire at 100%.Anyone able to help with this one?
2023-02-2723220can’t access laser control commands in device settings for Marlin. there is a line there but can’t open
2023-02-2421310I just cant work out the in and out pin assignments, some clarity would be awesome. I have 2 BOBs connected to my ESS. Number 1 BOB is 100% full with inputs and outputs. BOB #2 I have a bunch of pins but they are mostly all input pins shown on the ESS configuration page with just a few random ones being output pins.My question is pins 3,4,5 for ex...
2023-02-2118330I build an switch box for my Atomstack X20 (with updated firmware) with 2 Mosfet switches (with Optocouplers) to control the Air Assist (24V) and Enclosure Fan (12V). In Lightburn device settings Air Asist I have M7 activated. Measuring the I2C SCL signal on the controller there is no activity using M7 and M9 commands. Is there any way to control A...
2023-02-2023810Because the laser marking machine is based on the cooperation of X/Y galvanometer deflection to reflect the laser onto the worktable for accurate carving. The control of the galvanometer is controlled by the controller open-loop, so it must be linear, that is, the relationship between the input signal and the deflection angle is linear.Because the...
2023-02-2026810In the Multi-access Laser Micromachining System, lasers can be selected to be optimized for both tasks, with the shared workstation elements of part positioning, control and automation delivering highly precise machining of a vast array of materials.LPI (LP Information)' newest research report, the "Multi-Access Laser Micromachining Industr...
2023-02-1720000South London business invests in new printing and finishing equipment to free itself from the limitations of outsourced productionCMYUK, Shrewsbury: Standbuilder has invested in an Advance Sewing Automation V-TYPE/310C Digital, 2-Needle Lockstitch, Next-Generation Conveyor from CMYUK. This sewing machine will support the company’s new invest...
2023-02-15152001. As the key part of laser cutting equipment, motion control system has high reliability and real-time. It must ensure the fault-tolerant ability, and can self-correct the parameters, so that the system can operate normally and stably. At the same time, it must also meet the accuracy requirements of the system for real-time communication and have ...
2023-02-1435200The laser cutting machine system is generally composed of laser generator, (external) beam transmission module, workbench (machine tool), microcomputer numerical control cabinet, cooler and computer (hardware and software).1) Machine tool host part: the machine tool part of the laser cutting machine, the mechanical part that realizes the mo...
2023-02-1326800
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski