I have come into contact with many torque control machines and always think that torque control is more useful than torque clutch, with average accuracy; The servo accuracy is good, the response is fast, but it may not be applicable to all, and the price is high; Poor air pressure accuracy; Hydraulic complexity, difficult to control.
2024-01-2912110In the early automation industry, motion control was mostly pulse control and analog control. Later, CANopen was developed, and various Ethernet buses emerged, such as EtherCAT, PROFINET, POWERLINK, SercosIII, RTEX, and so on.Why is EtherCAT developing so rapidly both globally and in China now, mainly reflected in the following five points:...
2023-12-268110May I ask if you are planning to use a laser displacement sensor to scan the parts, and then use a servo motor with a grinding wheel to follow the contour of the parts for polishing? How should you configure the hardware?
2023-12-2610010Industrial cameras are the core components of machine vision systems, widely used in various fields such as industrial production, urban surveying, and grain sorting, especially for quality control, production monitoring, and measurement tasks. Compared with conventional cameras, industrial cameras have the characteristics of being sturdy and durab...
2023-12-1911020The main parameters of industrial cameras include resolution, frame rate, signal-to-noise ratio, pixel depth, etc. In addition, other important parameters also include dynamic range.Dynamic range refers to the brightness range in the scene or the photosensitive range of photosensitive materials such as film, CCD, CMOS, etc. For film and pho...
2023-11-308810Let me share my personal opinion,Industrial vision definitely requires,1. Hardware stability is beyond doubt. 7 * 24 operation should be used in many scenarios, as well as on-site working environments (temperature, dust, etc.)2. Piracy and genuine software. (Small businesses don't require it, but try to make it genuine. WIN11 Professional Editio...
2023-11-3011130AutomationDirect now offers SureServo2 servo systems that accept 460 Vac three-phase input power. With output power from 400W to 15kW, these 12 new perfectly matched sets of servo motors, drives, cables and accessories have all the features of our existing SureServo2 servo systems: onboard motion controller with registration, electronic camming and...
2023-10-269510The motion control system is equivalent to the brain of the laser equipment, which coordinates the various components of the equipment to work together and directs the laser to accurately focus and move quickly, which is the key to the effective completion of the task of the entire laser processing. Motion control system in different industries, di...
2023-07-2825010Laser cleaning technology is a new type of clean and environmentally friendly cleaning and processing technology that has emerged in recent years. Its working principle is to use a high energy laser beam to irradiate the surface of the material, so that the irradiated pollutants expand and evaporate, so as to achieve the purpose of removing stains....
2023-07-2530110From the point of view of concern, motor control (here refers to servo motors) is mainly concerned with controlling one or more parameters in the rotation, speed, and position of a single motor to reach a given value. The main focus of motion control is to coordinate multiple motors to complete the specified motion (synthetic trajectory, synthetic ...
2023-07-2028910What are the reasons why the motion control card is not linked
2023-07-0818610I want to make a torque machine with the plc and servo motor, see others do is to use the integrated machine zg3-8 0yt-7, this can go communication? Or does it use pulses to control the torque?
2023-04-2421310We all know the three-ring, in which the current ring is regulated by the driver itself, we need to do the work is to adjust the outside speed ring and position ring, which is the classic PID controlWhen we carry out positioning control, the speed curve and displacement curve will be planned in advance, and then the PLC is sent to the servo driver ...
2023-04-2425710We all know the three-ring, in which the current ring is adjusted by the driver itself, we need to do the work is to adjust the outside speed ring and position ring, inside this is the classic PID control,When we carry out positioning control, the speed curve and displacement curve will be planned in advance, and then the PLC is sent to the servo ...
2023-04-0423910High precision motion control, that is, to produce the fastest and smoothest time trajectory as far as the mechanical structure allows.How do you do that?Determine the algorithm under system constraintsMeanwhile, the complexity of the algorithm is also restricted by the real-time performance of the system and the speed of the computerUsual...
2023-03-3019700
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski