The principle of laser cutting tempered glassLaser cutting is a technology that uses a laser beam to perform thermal processing on materials. Under the irradiation of a laser beam, the surface of tempered glass undergoes instantaneous thermal expansion and cooling, resulting in a stress difference that causes the glass to fracture in the laser beam...

Jamie

2024-12-31

154

2

2

1、 Waterway inspectionThe main reason for abnormal water flow in the laser is due to water blockage or pump failure. Therefore, we first need to check whether the water path of the laser is blocked and whether it is well connected. If there is a blockage in the waterway, it is necessary to clean or replace the local water pipe and exhaust it. If th...

Keegan

01-06

98

0

1

I am using a co2 omtech laser with my fiber laser. When I switch between the 2 machines the orientation of my project has to be adjusted in machine settings each time. If I create a project on my co2 and open it on my fiber laser in lightburn the orientation and other settings are all messed up. How do I fix this??

Cruise Wang

2024-12-26

172

5

1

Hello,we are encountering an issue with our F1 Ultra in combination with Lightburn.We recently updated everything to the newest version (XCS 2.3.24 / Lightburn 1.7.04 / F1 Ultra 40.52.012.2020.01.ht5 / Plugin 1.4.22)Today, we experienced a phenomenon where the laser suddenly shifted 1 cm to the left in the middle of the engraving. It then continued...

Erdogan

2024-12-31

214

2

0

On one PC I open 2 Lightburn instances, the laser will connect to the first instance. In the second instance I am editing a project, but I am unable to send it to the laser because the laser is attached to the first instance.Is there a way to disconnect the laser from Lightburn and make the laser available for another instance?

Erdogan

2024-12-27

135

2

0

In modern manufacturing, laser welding machines have become indispensable high-precision welding tools in many industrial fields due to their high efficiency and precision. However, in the face of frequent job demands and harsh working environments, the laser occasionally emits alarm signals, which not only affects production efficiency but also te...

Kevin

2024-12-26

133

0

0

I have the use of a Falcon 2 22w. My coworker bought it and has not been able to use it after a year or so.I run a MacBook Pro Sequoia 15.2I think this may be a problem of my own making. I set up in the basement cut a couple of pieces and was in awe. And looking for clean air…After moving to my garage again I set up and cut a couple pieces. The com...

Noah

2024-12-24

212

3

0

Made the jump to an Omtech Pro 80W from XTool S1 40W.Running the lines at 100 mm/s / 10%, is there any way to not have those hot spots on corners?

Ruddy

2024-12-25

115

1

0

Please tell me how to fix this. I can’t even do the camera calibration. Thank you!

Roderick

2024-12-21

188

3

0

When the laser cleaning machine encounters a malfunction, the following steps can be followed for quick troubleshooting and resolution:1、 Preliminary inspectionPower check:Confirm if the power plug is properly plugged in and if the power cord is intact.Check if the power switch is turned on and if the power indicator light is on.Appearance inspe...

Clarence

2024-12-24

123

0

1

So. I’ve always cut stars with my Ortur Laser Master pro at a speed of 80 and 80 power. Always worked like a charm. Now it’s not cutting thru the basswood. You see a faint line on the backside and that’s it. This is extremely frustrating. Any help would be great.

LWE

2024-12-20

121

3

0

I was using Inkscape/K40 Whisperer and switched to Lightburn. When I import my previous designs that are set to vector & raster engrave, they only import as vector. Is there a way to change that? Do I need to copy and have one layer that is line and an identical layer that is fill?

Jack Wilborn

2024-12-23

165

2

0

Reasons for the problem of laser engraving not being roundDuring laser engraving, there may be issues with roundness. This is mainly caused by the following reasons:1. Unreasonable device parameter settings: If the device parameters are inaccurate or unbalanced, the accuracy and quality of the carved object will be affected, resulting in irregular ...

Keegan

2024-12-23

189

0

0

Hi, I have an omtech 80w laser that I’ve had for about 6 months. I’ve been using it a lot more often in the past 2 weeks gearing up for the holidays. I mostly just am curious about maintenance. My machine has suddenly stopped cutting as well: I’ve taken the nozzle apart and cleaned the lens. I’ve cleaned the mirrors as well. Maybe I’m not doing goo...

Carey

2024-12-18

140

4

0

Hi,I am fairly new to Lightburn but picking up things quickly by doing and manipulating some designs. However, I have hit the stops on this problem.I have the attached image with parts of the design on separate layers and I want to place everything outside of the outer black circle onto the black layer and similarly everything outside the inner bl...

Marshall

2024-12-19

175

3

0