Hello.I have RDC 6563FG, laser MAX 1500, BM-110 head and two X-Y axes.I need to place the metal plate at a distance of more than 30 mm from the nozzle and process it with a defocused laser beam.Is it possible to disable the use of the capacitive sensor and not monitor the gap between the metal plate and the nozzle? Otherwise, the message appears - ...

A56F72A7

02-26

183

5

0

Laser cutting machine, as a high-precision processing equipment, plays an important role in industrial production. With the continuous advancement of technology, many users choose to upgrade their laser cutting machines to improve their processing efficiency and cutting quality. During the upgrade process, replacing the laser is one of the key step...

Smith

03-07

49

0

0

Preparation work for replacementBefore replacing the slider, it is necessary to prepare the corresponding tools and spare sliders to ensure timely completion of the replacement process. Meanwhile, in order to prevent accidents, the laser cutting machine needs to be powered off and put on standby for a period of time.Use tools to remove the origin...

Marshall

03-06

57

0

1

My svg looks good on the workspace and node edit mode looks good but preview has gaps in the path and actual output matches preview.I have redone the shapes and at first it looked good until I did the preview after moving it to Upper left corner.What should I check?I have gone back and now find that the loss occured when I put the output on laye...

Narrator

03-04

56

2

0

Hi all, I am running into a very frustrating issue with multiple layers and alignments.I have a 10W Vevor A7 and keep having the same issue. I am trying to create wheels for a project and have tried many different ways of creating the file.The file looks perfect on screen, but the results are far from that. It seems that I isn’t even cutting the c...

Andre J

02-28

75

4

0

Laser marking has certain requirements for the glossiness, thickness, and hardness of aluminum material surfaces.Requirements for laser marking on aluminum material surfaceDuring the laser marking process, factors such as glossiness, thickness, and hardness of the aluminum surface can all affect the marking results. Therefore, in order to achieve...

Miller

03-04

57

0

0

I have an Algolaser DIY 20W and everything works normally. Recently, I bought a Delta 22W, and when performing the material test, I have this misalignment problem.I have already tried tightening the belts and checking for vibrations, but nothing, absolutely nothing works.Does anyone have any ideas on how to solve this?

Ruddy

02-20

93

8

0

I have a six month old sculpfun S30 22W. I have always used a kerf of 0.13mm outward when making boxes. Lately I have noticed that the joints are no longer as tight as they were at the beginning and I have to set the kerf to 0.20mm outward. Is this normal? Is there some setting somewhere, or has the beam gone out of focus?

Jack Wilborn

02-28

126

3

0

I’m only just getting started with LB, and I doubt this is actually a LB issue, but the number of passes does not seem to work like I would have expected.I have some experience with lasers and optics going back years.My expectation was that if I can get a 1mm deep cut on pass #1, I should get a bit less than 1mm again on pass 2. However that does...

Ethan

02-28

123

3

0

Preparation work before replacing laser machine partsBefore replacing laser machine components, it is necessary to first turn off the machine power and confirm the model and parameters of the components to be replaced. At the same time, suitable tools such as electrician pliers, screwdrivers, focusing cards, etc. should be prepared.Replace laser ...

Clarence

03-03

56

0

0

I have no problem putting text on a circle path. I can even figure out how to place it on the bottom and it be readable. My question is how do I remove the circle and the text stays curved? When using Framing, it creates a problem even if it is No Output and Not Visible selected. I think I did it once, but did not take notes.

Durell

02-27

55

2

0

Text misaligned using rotary roller

Hiroko

02-21

63

6

0

I have a 60W JPT EM7 MOPA Fiber laser and when I mark a circle, the top to bottom is shorter than the width. For example, I have a circle set to 2.625", but when I mark it, it comes out 2.625" wide x 2.531" tall. Any ideas on what to look at would be appreciated.

Erdogan

02-24

108

5

0

I have a design and want the stars and the other forms that now show as filled to be the areas that are not filled and the background area to be the fill. I tried to do some things with Offset shapes and no luck. Any ideas?

Noah

02-26

50

2

0

Skills and precautions for laser cutting of foam cottonFoam cotton is a kind of light, soft material with good sound insulation and shock resistance. It is widely used in electronics, instruments, communications, household appliances, automobiles, aviation and other fields. Foam cotton is usually processed by hand cutting or cutting tools, but thes...

Nugent

02-28

53

0

0