Wood is one of the most common processing materials for laser engraving. Laser engraving wood has the advantages of fine carving effect, accurate positioning, and no mechanical wear. With the help of intelligent control system, the processing plan can be flexibly adjusted to quickly complete personalized design. Therefore, it has a wide range of ap...
02-285500At present, large-scale fabric processing is mainly completed by knife cutting or laser cutting, and there are the following difficulties in the processing process:Soft deformation: The biggest characteristic of fabric is its softness and easy deformation, which makes it difficult to fix during cutting, resulting in difficulty in ensuring cutting...
02-285900Acrylic is a widely used polymer plastic with a transparency of over 92% and excellent toughness and compression resistance, 9-17 times that of glass. It has a wide range of applications in various industries such as advertising display, building decoration, furniture, lighting fixtures, etc.Laser cutting of acrylic materials is prone to the foll...
02-286500The fiber optic cutting control system is the control core of the fiber optic laser cutting machine. By sending signals to the laser and motor, the control system can accurately control the laser output and mechanical axis movement to complete the cutting and processing tasks. The fiber optic cutting system can also arrange the processing tasks, in...
02-2859001. Laser powerPower directly affects the amount of melted powder and coating efficiency per unit time. When other working parameters are determined, low power may result in incomplete powder melting, pitting after polishing, insufficient bonding force, and low coating hardness; If the power is too high, it may be due to excessive melting of the mel...
02-285300Precautions for using plastic laser welding machineBefore turning on the laser, ensure that there are no excess obstructions on the welding joint! Before powering on the system, please confirm that the welding joint mirror and fixture surface are clean and can be cleaned with specialized cleaning solutions such as anhydrous alcohol.When major abno...
02-2844001. If the motor burns out, generally not both machines will burn out. Just change the motor object that drives the output to test whether the other machine is normal. Motor damage can generally only be replaced by contacting after-sales service.2. Drive failure. If the drive light does not light up or flashes continuously with a burnt smell while...
02-285800In recent years, the efficiency problem of metal processing has gradually been solved by fiber laser cutting machines, and common metals are mainly stainless steel, carbon steel, and aluminum plate. Until now, both stainless steel and carbon steel can be easily cut. As a high reflectivity material, cutting aluminum has always been a difficult probl...
02-285400When choosing a linear motor, in order to ensure the selection of the most suitable model for your needs, it is necessary to comprehensively consider the following key parameters:1、 Model and sizeFirstly, the model and size of the motor should be determined based on the limitations of the application space and the requirements of the workload. Di...
02-274900The operating environment of laser marking machineThe laser marking machine must ensure a relatively clean surrounding environment during the production process, free from any interference from dust, grease, and chemical pollutants, which can accelerate the aging and damage of the laser marking machine.The impact of environmental dust on laser ma...
02-275600Improper setting of welding parametersThe parameter settings of laser welding have a significant impact on the welding effect. If the parameter settings are not appropriate, it may cause pits on the surface of the weld seam. Therefore, before performing laser welding, it is necessary to set reasonable parameters such as laser power, focal position,...
02-274500My Lasertree Mini K1 was running fine now all of a sudden I cannot get one project done because it stops in mid burn. I checked to make sure the wires were not hitting any of the home sensors, even redid all the connections and wire tied them in place better.got this errorMSG:Using machine:MKS DLC32]Grbl 1.1h [‘$’ for help][MSG:‘$H’|‘$X’ to unl...
02-2564201. Common consequences of poor welding quality-Decreased welding strength: Poor quality welds often have defects such as cracks, pores, and lack of fusion, which lead to a decrease in the strength of the welded joint and make it unable to withstand external loads, thereby affecting the overall safety and reliability of the product.-Reduced fatig...
02-264500Laser issue1. The laser is not turned onIf the laser is not turned on or does not emit a laser beam after being turned on, it may be due to the power cord not being properly plugged in or an internal problem with the laser. You can check the connection of the power cord and contact after-sales personnel for maintenance to ensure that the laser is w...
02-255200If you at the TWhat causes the arrow tips in the corners of the T all other fonts have it also except the OThis an Arial font which has been switched from a Sans Sherif font which did the same thing.From what I can see I have nothing extra switched onThe strange thing is if I increase the power the arrows go away which doesn’t work in this case. Th...
02-176861
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski