I have a 60W JPT EM7 MOPA Fiber laser and when I mark a circle, the top to bottom is shorter than the width. For example, I have a circle set to 2.625", but when I mark it, it comes out 2.625" wide x 2.531" tall. Any ideas on what to look at would be appreciated.
02-2410350I have a design and want the stars and the other forms that now show as filled to be the areas that are not filled and the background area to be the fill. I tried to do some things with Offset shapes and no luck. Any ideas?
02-264620Skills and precautions for laser cutting of foam cottonFoam cotton is a kind of light, soft material with good sound insulation and shock resistance. It is widely used in electronics, instruments, communications, household appliances, automobiles, aviation and other fields. Foam cotton is usually processed by hand cutting or cutting tools, but thes...
02-285000Wood is one of the most common processing materials for laser engraving. Laser engraving wood has the advantages of fine carving effect, accurate positioning, and no mechanical wear. With the help of intelligent control system, the processing plan can be flexibly adjusted to quickly complete personalized design. Therefore, it has a wide range of ap...
02-284900At present, large-scale fabric processing is mainly completed by knife cutting or laser cutting, and there are the following difficulties in the processing process:Soft deformation: The biggest characteristic of fabric is its softness and easy deformation, which makes it difficult to fix during cutting, resulting in difficulty in ensuring cutting...
02-285300Acrylic is a widely used polymer plastic with a transparency of over 92% and excellent toughness and compression resistance, 9-17 times that of glass. It has a wide range of applications in various industries such as advertising display, building decoration, furniture, lighting fixtures, etc.Laser cutting of acrylic materials is prone to the foll...
02-285900The fiber optic cutting control system is the control core of the fiber optic laser cutting machine. By sending signals to the laser and motor, the control system can accurately control the laser output and mechanical axis movement to complete the cutting and processing tasks. The fiber optic cutting system can also arrange the processing tasks, in...
02-2853001. Laser powerPower directly affects the amount of melted powder and coating efficiency per unit time. When other working parameters are determined, low power may result in incomplete powder melting, pitting after polishing, insufficient bonding force, and low coating hardness; If the power is too high, it may be due to excessive melting of the mel...
02-285100Precautions for using plastic laser welding machineBefore turning on the laser, ensure that there are no excess obstructions on the welding joint! Before powering on the system, please confirm that the welding joint mirror and fixture surface are clean and can be cleaned with specialized cleaning solutions such as anhydrous alcohol.When major abno...
02-2842001. If the motor burns out, generally not both machines will burn out. Just change the motor object that drives the output to test whether the other machine is normal. Motor damage can generally only be replaced by contacting after-sales service.2. Drive failure. If the drive light does not light up or flashes continuously with a burnt smell while...
02-285500In recent years, the efficiency problem of metal processing has gradually been solved by fiber laser cutting machines, and common metals are mainly stainless steel, carbon steel, and aluminum plate. Until now, both stainless steel and carbon steel can be easily cut. As a high reflectivity material, cutting aluminum has always been a difficult probl...
02-285200The operating environment of laser marking machineThe laser marking machine must ensure a relatively clean surrounding environment during the production process, free from any interference from dust, grease, and chemical pollutants, which can accelerate the aging and damage of the laser marking machine.The impact of environmental dust on laser ma...
02-274900Improper setting of welding parametersThe parameter settings of laser welding have a significant impact on the welding effect. If the parameter settings are not appropriate, it may cause pits on the surface of the weld seam. Therefore, before performing laser welding, it is necessary to set reasonable parameters such as laser power, focal position,...
02-274100My Lasertree Mini K1 was running fine now all of a sudden I cannot get one project done because it stops in mid burn. I checked to make sure the wires were not hitting any of the home sensors, even redid all the connections and wire tied them in place better.got this errorMSG:Using machine:MKS DLC32]Grbl 1.1h [‘$’ for help][MSG:‘$H’|‘$X’ to unl...
02-2560201. Common consequences of poor welding quality-Decreased welding strength: Poor quality welds often have defects such as cracks, pores, and lack of fusion, which lead to a decrease in the strength of the welded joint and make it unable to withstand external loads, thereby affecting the overall safety and reliability of the product.-Reduced fatig...
02-264400
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski