Possible reasons for the sudden stop of laser cutting1. Insufficient power: Insufficient power of the laser cutting machine may cause a sudden stop during the cutting process. This may be caused by a problem with the laser pump.2. Abnormal optical path: The deformation or contamination of mirrors in the laser optical path may also cause the laser c...

Payson

01-13

92

1

2

When I have a window open and connected to the laser and working.Why don’t I get oneconnection with to the laser from the second or third or fourth window . I have to close the first window to regain connection with the laser againI would like to changebetween the windows for burning withoutrestart LB

Silvano

01-09

97

2

0

Since the Lightburn update, I have encountered issues and realized that the settings for speed and power have changed, and my machine is no longer functioning properly. For more information, I am using SCULPFUN S30 5W, but this time I encountered difficulties at work because. I no longer find myself asking for help because my problem has not been r...

Carey

01-07

109

5

0

Have: Neje Max 3 and latest release of LightburnI have problems with the coordinates in Lightburn not matching my Neje Max 3.When I have a drawing in Lightburn that is within the “Working Area”, but close to the edge and I select “Start” I get an error message “out of bounds”Looking for help to calibrate so that Lightburn and the laser match.My w...

LWE

01-08

82

3

0

The occurrence of ghosting or blurriness during engraving operations on laser marking machines may be due to various reasons. To solve this problem, it is usually necessary to follow the following steps to check and adjust:1. Check the optical system:Confirm whether the laser and its optical components (such as lenses) are clean, as dust and stai...

Miller

2024-12-27

119

1

3

1、 The lifespan of the nozzle has expiredThe service life of the laser cutting machine nozzle is limited, usually around 500 hours. If it exceeds the service life, both cutting quality and economic benefits will be affected, and a new nozzle needs to be replaced.2、 Damaged nozzleThe laser cutting machine nozzle is prone to damage, such as nozzle ...

Keegan

01-08

82

1

1

1. Fault phenomenon one: The laser marking machine does not produce laser lightThe troubleshooting steps are as follows:Power supply inspection: Firstly, it is necessary to confirm whether the power supply wiring of the laser is correct, including whether+24V and GND are reversed, and whether the ground wire is properly grounded. Test whether the...

Terrelle

01-09

111

1

2

I’ve had a aufero laser 2 with a ortur lu2-10a 24v laser module for about a year now.I was never able to achieve the thickness of cuts that are represented on their site and from other users.While doing some research, i noticed that the lu2-10a was sold as an upgrade and it came with an ouc board to inject another 24v to fire the 2nd 5w diode in th...

Noah

01-03

118

3

0

There are various types of paper materials with different characteristics. For example, commonly used printing materials such as news paper, copperplate paper, and offset printing paper have the characteristics of softness and good ink absorption. Packaging materials such as kraft paper and corrugated paper have the characteristics of tough texture...

Patrick

01-07

185

2

3

Numbers have turned into symbols

Jack Wilborn

01-06

85

2

0

I'm fairly new with the laser and really getting along until yesterday. I tried a "sign: with a frame. The laser head jumps and make scraping sound. It appears to be attempting to swing all the way across the workspace and not just the design. When I removed the frame it printed perfectly. I tried again today and the preview appears to be heading o...

AL.TAL

01-02

105

4

0

When do I need to recalibrate the camera?It sometimes happens that I accidentally touch the camera and the angle to the engraving plane changes. Then I try to restore the old position, but I don’t exactly succeed.Do I then always have to carry out all the steps such as lens calibration and camera alignment? Maybe just recalibrating the camera orien...

Andrej

2024-12-30

227

6

0

There may be several reasons why laser cleaning machines cannot clean thoroughly:1. Improper setting of cleaning parameters: The laser cleaning machine needs to set reasonable parameters based on factors such as the material, shape, and type of dirt of the object during the cleaning process. If the parameters are set improperly, it may lead to poor...

Clarence

01-03

141

3

2

Laser cutting technology is widely used in various industrial manufacturing fields due to its high precision and efficiency. However, in order to ensure cutting quality and equipment lifespan, it is necessary to strictly control the operating environment. The following are the key environmental conditions required for laser cutting:1、 Suitable te...

Clarence

01-02

126

2

4

Reasons for deformation of acrylic sheet during laser cuttingAcrylic sheet is a commonly used organic glass, which is widely used in industries such as advertising signs, lighting fixtures, furniture, etc. When laser cutting acrylic sheets, deformation may occur. There are various reasons for the deformation of acrylic sheets: it may be due to exce...

John Trant

2024-12-30

179

2

3