Not sure what I’m doing wrong. Ortur LM2, 10W diode, creality chuck rotary.That’s supposed to be a 0.25” circle. Ran it at 40 inches per min and the results speak for themselves. I’m confident the tumbler is not slipping in the chuck. Any help would be greatly appreciated!

Noah

2024-11-05

117

1

0

What I'm worried about is when I want to carve a circular logo on a water bottle, for example, if the image on Ligtburn is clean but distorted on my water bottleI checked the rotation and support settings, but it had no effectThe rotation setting is good, and the belt is tightened.Carving machine Atzer L2 36WRotaru AtomStack R1 ProPlease help ...

Tim Johnson

2024-11-01

89

2

0

I have a Laser Master 2 pro and I ran the machine for a few hours, after disconnecting tje machine and on reconnecting the machine I got a flashing red light

Cruise Wang

2024-10-31

119

3

0

When I home my machine (JTech Laser / Shapeoko 3 XL) I get position and it shows up in the 800’s. See the attached JPG. I leave the machine in the home position and restart Lightburn I get the same thing or once I restarted it and got 33. I can’t get it to come up zero even though it seems to be homing okay physically.

Iron Man

2024-11-04

96

1

0

Hi,Yesterday when i turned on the machine it started flashing red light and continually beeping. I tried restarting but nothing happened. then i moved the head in the middle and it stopped. After that, the laser started to turn of for 2-4 seconds during cutting while the head continued on the cutting path and then turned on again. Also if i run a f...

JOST

2024-10-31

137

2

0

I am trying to update my camera overlay but it is constantly grayed out. I have tried doing the alignment multiple times but haven’t had any luck

Durell

2024-11-01

127

1

0

I screwed up and changed the $ values and didn’t back it up so I can’t get this machine to operate properly anybody help ? maybe post your settings? thanks

Carey

2024-10-29

101

2

0

When I try to load a saved file, it doesn’t recall the correct power and speed settings.

Silvano

2024-10-25

115

5

0

Hello,We have a Boss LS 1630 and we are using the Piburn rotary attachment to try and engrave dog bowls. I have been able to use the roller to engrave cups just fine but I have tried to use the chuck for the dog bowls which are much wider in diameter. Rotary mode is turned on, steps are set, and the proper diameter and circumference of the object a...

Hiroko

2024-10-30

94

1

0

helloi havent used my 3018 in a while and am wondering what im doing wrong. i’m all set up wit grbl and lightburn 1.7.03 I power up and it begins to home motors just stuttuer terribly and wont move.however if I run under focus test the hardware seems fine. thank you

Jack Wilborn

2024-10-30

89

1

0

After upgrading to an Xtool D1 Pro Ive been having a lot of success. As I move closer to launching some product lines with this I’m starting to see the issues with scaling my jobs into larger batches.The problem: Etching more then one coaster at a time seems impossible if i want the design to be centered. They arent all the exact size or shape whic...

Ruddy

2024-10-26

91

3

0

I want to create a circle with a 40 mm CIRCUMFERENCE. Is there a field (box for entering data) in Lightburn where I can enter “40” and I will get a circle with a 40 mm circumference?

이야기 너와

2024-10-29

119

1

0

Handheld laser welding machine is a new type of intelligent welding processing equipment. As an industrial equipment, it is inevitable to encounter various problems during use. In order to ensure work efficiency, improve safety, and extend the service life of the equipment, we need to pay special attention to the following matters during use:Pre ...

Narrator

2024-10-28

84

1

0

I’m etching glass and I want the rotary to only spin one direction. I’ve drawn this image which contains both a text object and an image. Lightburn separates them in the cuts/layers window, even though they are both on the same layer. When I burn them, even though I have “fill all shapes at once” set on both layers, it draws the image and then roll...

James

2024-10-28

99

1

0

I have a project where I have two images, one is inverted, the other not. When I do a Preview I do not want it to be inverted so I deselect it. However, when I go back out, make a few changes and do another Preview, it is back to selecting ‘Invert’. It would be better I think to remember the user’s selection of whether he/she wants to Invert the pr...

LWE

2024-10-24

117

3

0