1. Carbon steelCarbon steel is generally cut using oxygen during laser cutting, which can be divided into positive focus cutting and negative focus cutting. The cross-section of positive adhesive cutting is a glossy or frosted surface, while when using high-power equipment, negative adhesive cutting can be used. The cutting section quality of mediu...

Tory

2024-07-30

77

0

0

1、 The optical path is not parallelDuring laser assembly, there may be situations where the optical path is not parallel, resulting in optical center deviation. In this case, it is necessary to readjust the optical path to make it parallel in order to solve the problem of optical center offset.2、 Lens wear and tearThe optical components in laser c...

Robert Evans

2024-07-29

108

1

0

Controlling the focus in laser cutting usually involves the following steps: 1. Adjusting the laser beam: Firstly, it is necessary to adjust the output power and wavelength of the laser to ensure that the quality and intensity of the laser beam are suitable for cutting materials.2. Focusing lens: Use a focusing lens to focus the laser beam into...

Farouk

2024-07-26

138

1

0

1. It is necessary to clean the dirt on the machine tool and guide rail every working day to keep the bed clean. At the end of the day, turn off the air source and power, and at the same time, exhaust the residual air in the machine tool pipe.2. If leaving the machine for a long time, turn off the power to prevent non professionals from operating...

Jen

2024-07-26

120

0

0

The automation and digital control of metal laser cutting machines are mainly achieved through the following key steps and technologies:1、 AutomationAutomatic loading and unloading system:The automated loading and unloading system can automatically feed the raw materials to be cut into the laser cutting machine and automatically take out the fini...

JOST

2024-07-24

70

1

0

1. Unstable laser outputUnstable laser output is one of the common faults in fiber lasers, which may lead to unstable processing quality or even processing failure.Possible reasons:(1) Laser lens contamination(2) Poor heat dissipation of laser(3) The laser power supply is unstableresolvent:(1) Timely clean the lenses inside the laser(2) Check if th...

Andre J

2024-07-23

112

1

0

How to maintain laser cutting machines in summer?

Darren

2024-07-03

83

2

0

There may be several reasons why CO2 dynamic laser marking machine does not emit light:1. Laser malfunction: The laser is the core component of the CO2 dynamic laser marking machine. If the laser malfunctions, it will cause the marking machine to not emit light. Possible reasons include power failure of the laser, aging of the laser tube, or block...

Cyril

2024-07-03

68

1

0

There are four main points: fire prevention, condensation prevention, waterproofing, and lightning protection.Preventing fires1. When using a laser cutting machine, do a good job of cleaning the surrounding environment of the equipment. Avoid stacking flammable and explosive foreign objects around to prevent sparks from splashing and causing fire...

David

2024-06-22

71

1

0

Single axis multi head laser cutting machine refers to a laser cutting machine with multiple laser heads on a moving axis. In most cases, these laser heads move synchronously and are used to cut the same pattern on the same row or column. In the advertising and clothing industries, this type of processing requires more, such as stickers on fabrics,...

Andre J

2024-06-07

86

0

0

Multi head laser cutting machine is a general term for a type of laser cutting equipment, which refers to cutting equipment with multiple laser heads. The number of laser heads here is not fixed, and can be more or less, but most of them are used to process materials with larger widths. Compared to single head laser equipment, multi head laser cutt...

Tim Johnson

2024-06-06

65

1

0

A dual head laser cutting machine is a laser processing equipment used for processing large and complex patterns. It mainly consists of two motion axes that control two different laser heads. The two laser heads work synchronously on the same platform without interfering with each other. Compared to single axis laser equipment, double headed laser ...

Christian

2024-06-03

88

1

0

In the field of material processing, laser technology has gradually become the preferred choice for industrial processing. Whether metal or non-metal materials, lasers can efficiently and accurately complete processing tasks, and achieve no deformation, small thermal reactions, and smooth edges. At present, laser processing tasks include cutting, c...

Patrick

2024-05-13

63

1

0

1. Machine vibrationDuring the cutting process of a laser cutting machine, if it is affected by external factors such as water tanks, exhaust fans, etc., it may generate vibration, resulting in wave marks on the cutting surface.2. Gear slippingThe slippage between the gear and the gear seat may also cause wavy lines on the machined section.&nbsp...

Henry

2024-04-19

101

1

0

In the field of glass processing, laser cutting technology has gradually become a new favorite in the industry due to its high precision, high efficiency, and environmental protection characteristics. Among numerous laser cutting technologies, ultraviolet laser cutting machines and infrared laser cutting machines have become the focus of the market...

Noah

2024-04-15

84

1

0