Reasons for Laser Weakening in Laser Marking MachinesThere may be various reasons for the weakening of laser marking machine, and the following are some common reasons:1. Lens damage: If the lens is scratched, overheated, or contaminated, it can cause poor reflection and weaken the laser marking machine.2. Laser tube aging: The lifespan of laser tu...

Christian

2024-12-21

105

1

0

To avoid producing burnt or yellow edges when cutting acrylic sheets, the following methods can be adopted:1. Using high-power laser cutting machines: High power laser cutting machines can quickly and accurately complete cutting tasks, reducing the possibility of producing focal edges during cutting.2. Adjusting the parameters of the laser cutti...

Aaron

2024-12-20

123

0

0

Analysis of Splashing Causes in Laser Cladding of Alloy PowderThe occurrence of splashing phenomenon during laser cladding of alloy powder is mainly due to the following reasons:1. Insufficient surface roughness of the materialIf the surface roughness of the material is insufficient, when the laser is irradiated onto the surface of the material, a...

Liam

2024-12-19

116

0

0

Working principle of laser rust removal machineLaser rust removal machine is a high-tech equipment that uses a high-energy density laser beam to instantly hit the surface of the object being removed, vaporize the dirt, and achieve rust removal effect. The laser beam of the laser rust remover can not only remove rust, but also remove substances such...

Vasili

2024-12-17

94

1

0

Suddenly a large number of overscan blanks appear, which setting is wrong?

Andre J

2024-12-12

151

5

0

Hello I have a little problem. When I try to frame my project on Creality Falcon 2 it fails because every time it goes like left and down and the laser starts beeping. But when I use another PC it works completly fine. Does anyone know what the problem is?

Cruise Wang

2024-12-13

220

2

0

What is the reason for the jumping of the laser marking machine?Many people encounter jumping problems when using laser marking machines, which may be caused by the following factors:1. Machine malfunction: Long term non-stop operation of the laser marking machine during use can cause the equipment to overheat, thereby affecting its working effic...

Payson

2024-12-17

127

0

1

1. Check the power connection cableCarefully inspect all power connection wires of the krypton lamp, including plugs, sockets, and wiring, for any looseness, detachment, damage, or other issues. If the connecting wire is found to be loose, it needs to be re plugged tightly; If there is damage, a new connecting wire needs to be replaced.2. Check i...

Gilbert

2024-12-16

109

0

0

I would like to index a foil off a small spool using the rotary unit (repeating shape). Any ideas?

Silvano

2024-12-09

110

5

0

have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...

Roderick

2024-12-11

139

3

0

Hello. I jusy bought the new Creality rotary chuck to go with my Elegoo Phecda. I have the chuck plugged into the y axis cable. In lightburn, I have the rotary tool enabled, step set to what was provided in the manual, and measurements of the object. I also turned off the homing feature for my after market limit switches.The problem is that, when ...

Clarence

2024-01-16

107

2

0

The use environment of the cleaning machine leads to a weakened effect1. High or low ambient temperature: Laser cleaning machines are generally suitable for ambient temperatures between 5 ℃ and 35 ℃. If the ambient temperature is too high or too low, it will affect the normal operation of the laser cleaning machine, resulting in a weakened cleaning...

Abel

2024-12-13

103

0

0

Reasons for laser weld indentation problemDuring the laser welding process, the welding area is subjected to high temperatures, which can cause deformation due to thermal expansion and contraction, resulting in a concave weld seam. In addition, the selection of welding materials and welding parameters can also affect the occurrence of weld indentat...

Marshall

2024-12-12

110

1

0

Reasons for the appearance of color in laser welding seamsDuring laser welding, if the welding parameters are not appropriate, it often leads to the appearance of color in the weld seam. This problem mainly occurs on high reflective materials such as stainless steel, aluminum alloys, and titanium alloys. After analysis, in addition to inappropriate...

Tory

2024-12-11

96

0

0

I’ve had my laser for A. Bout. And the horizontal lines are starting to bump or drag. I have to keep this fresh and people’s minds because.

Roderick

2024-12-10

79

1

0