We are a professional Stable operation of Stable operation of hydraulic punch press manufacturer with over 10 years of industry experience. Today, we would like to introduce to you:https://www.sdsmachinery.comStable operation of hydraulic punch press is a type of punch press that uses hydraulic cylinders to generate compressive force and belongs ...
2024-12-2313711So. I’ve always cut stars with my Ortur Laser Master pro at a speed of 80 and 80 power. Always worked like a charm. Now it’s not cutting thru the basswood. You see a faint line on the backside and that’s it. This is extremely frustrating. Any help would be great.
2024-12-2012130I was using Inkscape/K40 Whisperer and switched to Lightburn. When I import my previous designs that are set to vector & raster engrave, they only import as vector. Is there a way to change that? Do I need to copy and have one layer that is line and an identical layer that is fill?
2024-12-2316520Reasons for the problem of laser engraving not being roundDuring laser engraving, there may be issues with roundness. This is mainly caused by the following reasons:1. Unreasonable device parameter settings: If the device parameters are inaccurate or unbalanced, the accuracy and quality of the carved object will be affected, resulting in irregular ...
2024-12-2318900Hi, I have an omtech 80w laser that I’ve had for about 6 months. I’ve been using it a lot more often in the past 2 weeks gearing up for the holidays. I mostly just am curious about maintenance. My machine has suddenly stopped cutting as well: I’ve taken the nozzle apart and cleaned the lens. I’ve cleaned the mirrors as well. Maybe I’m not doing goo...
2024-12-1814040Hi,I am fairly new to Lightburn but picking up things quickly by doing and manipulating some designs. However, I have hit the stops on this problem.I have the attached image with parts of the design on separate layers and I want to place everything outside of the outer black circle onto the black layer and similarly everything outside the inner bl...
2024-12-1917530Reasons for Laser Weakening in Laser Marking MachinesThere may be various reasons for the weakening of laser marking machine, and the following are some common reasons:1. Lens damage: If the lens is scratched, overheated, or contaminated, it can cause poor reflection and weaken the laser marking machine.2. Laser tube aging: The lifespan of laser tu...
2024-12-2110710To avoid producing burnt or yellow edges when cutting acrylic sheets, the following methods can be adopted:1. Using high-power laser cutting machines: High power laser cutting machines can quickly and accurately complete cutting tasks, reducing the possibility of producing focal edges during cutting.2. Adjusting the parameters of the laser cutti...
2024-12-2012300Analysis of Splashing Causes in Laser Cladding of Alloy PowderThe occurrence of splashing phenomenon during laser cladding of alloy powder is mainly due to the following reasons:1. Insufficient surface roughness of the materialIf the surface roughness of the material is insufficient, when the laser is irradiated onto the surface of the material, a...
2024-12-1911700In industrial production, the noise generated by the operation of chillers is a common problem. Noise not only affects the working environment, but may also indicate internal problems with the equipment. Here are some reasons and solutions for excessive noise in chillers:1. Installation environmentThe installation environment of a chiller has a s...
2024-12-1813111Working principle of laser rust removal machineLaser rust removal machine is a high-tech equipment that uses a high-energy density laser beam to instantly hit the surface of the object being removed, vaporize the dirt, and achieve rust removal effect. The laser beam of the laser rust remover can not only remove rust, but also remove substances such...
2024-12-179410Suddenly a large number of overscan blanks appear, which setting is wrong?
2024-12-1215150Hello I have a little problem. When I try to frame my project on Creality Falcon 2 it fails because every time it goes like left and down and the laser starts beeping. But when I use another PC it works completly fine. Does anyone know what the problem is?
2024-12-1322020What is the reason for the jumping of the laser marking machine?Many people encounter jumping problems when using laser marking machines, which may be caused by the following factors:1. Machine malfunction: Long term non-stop operation of the laser marking machine during use can cause the equipment to overheat, thereby affecting its working effic...
2024-12-17127011. Check the power connection cableCarefully inspect all power connection wires of the krypton lamp, including plugs, sockets, and wiring, for any looseness, detachment, damage, or other issues. If the connecting wire is found to be loose, it needs to be re plugged tightly; If there is damage, a new connecting wire needs to be replaced.2. Check i...
2024-12-1611000
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski