Do you like the piggy bank? Look at this one I made?

Jack Wilborn

2023-02-02

294

3

4

How to Vote: Select the features you most want to see in the software (multiple choices allowed) and feel free to share additional ideas in the comments!

Leon

02-06

528

1

1

1、 Analysis of the causes of oil leakage in the gearbox:Oil leakage is more common in gearboxes, with particularly prominent leakage at the seals of the drive and driven shaft heads, especially at the sealing ring of the drive shaft. In addition, there are three other common oil leakage locations, including oil leakage along the gearbox joint surfa...

Henry

02-08

65

0

1

I have a 5W 12V AtomStack, I want to change the laser for a 20W 24V one. What should I implement to be able to adapt it to the new laser module?

Cruise Wang

02-05

59

3

0

The fiber cutting control card is the control core of the fiber laser cutting machine. It is a motion control card that, by connecting to a PC and leveraging the powerful computing power of the PC, can quickly and accurately control the movement of the laser head to achieve high-precision and high-efficiency processing tasks.The use of fiber opti...

Payson

02-07

77

0

0

Hi, I just purchased “Longer” laser, my problem is when it homes it doest stop but keeps on vibrating off the side bars, I can’t see any sensors, I’m thinking it may be a setting I need to open.

Durell

02-06

144

2

0

Aluminum magnesium manganese plate cost is mainly determined by the following factors.Raw material cost.The main raw materials of aluminum-magnesium-manganese plate are aluminum,magnesium,manganese and other metals.The price fluctuations of these metals will directly affect the cost of aluminum-magnesium-manganese plate.Processing technology.Diffe...

Aluminum magnesium manganese plate

02-06

76

1

1

The fiber cutting control system is the control core of the fiber laser cutting machine. The operator transfers files to the fiber cutting control system and sets the corresponding parameters before starting processing. This is a modern intelligent CNC system. After completing the settings, the equipment can start processing independently without t...

Marshall

02-06

74

0

0

The four major precautions for laser welding of aluminum alloys: Laser welding machines can indeed provide high energy density and welding speed when welding aluminum alloys, making the welding process more efficient. However, the high reflectivity and low heat absorption of aluminum alloys also pose significant challenges for welding. To avoid pot...

John Trant

02-05

76

0

0

I am engraving a square box-shaped ruler. The lines engrave lighter on the X-Axis than they do on the Y-Axis. They are all on the same layer with the same settings.Why does this happen and how do I fix it?

LWE

01-21

93

2

1

After a few cuts my brand new laser (Atomstack A10 pro V2 Black) suddenly did not ray (burning / firing), at the same time It is moving properly, fan works, two leds at laser module works (pwm is blue, power is orange).Such bad behavior exists both: under WIFI via Atom Stack Mobile app and USB control via LightBurn.I checked similar topics, and my ...

Hiroko

01-14

158

8

0

1. When the vertical light is incorrect, adjust the vertical light and if necessary, readjust the light path. 2. If the focal length is not adjusted properly, please refocus.3. Voltage instability, low voltage, and low laser current. You need to replace the voltage regulator with a larger one and increase the laser current output.4. If the lig...

Vasili

01-22

231

1

0

Dear users:Chanelink  team will be on holiday break from January 23 to February 4, 2025.During break, the following operations are on suspension：1.Review of uploaded files.2.Review of withdrawal request.Related operations will be processed within 2 working days after vacation.We kindly ask for your patience.Thanks for your understanding!

CL001

01-22

96

0

0

To achieve deep marking, we can adjust the parameters of the laser marking machine through the following methods:1. Adjust the focal lengthReduce the focal length to the minimum to ensure that the laser beam can be accurately focused on the surface of the material, thereby achieving the goal of deep marking.2. Adjust the laser powerLaser power i...

Liam

01-22

105

0

0

I’m trying to see my GRBL settings, but I can’t type anything into the command window.Side note: I’m new to this, and I’m only trying to see these settings to address a different issue. I have a Monport 30W fiber laser.

Tim Johnson

01-20

77

2

0